Fagor CNC 8060, Installation Manual

Page: 115 / 698

Installation manual.
CNC 8060
CNC 8065
MACHINE PA
RAMETERS.
2.
Gen
e
ral machin
e parameters.
·115·
(R
EF
: 1709)
2.3.32 Backup of non-volatile data.
BKUPREG
Number of non-volatile PLC registers.
Possible values: From 0 to 20.
Default value: 0.
Associated variable: (V.)MPG.BKUPREG
This parameter indicates the number of PLC registers that are saved in RAM memory with
a battery. The CNC saves the first registers, from the first one to the one set in this parameter.
Non-volatile data means that their values must be maintained from one session to another
and after turning the CNC off. The CNC saves this data when the CNC is turned off, when
power is removed, when a hardware error occurs, etc.
BKUPCOUN
Number of non-volatile PLC counters.
Possible values: From 0 to 20.
Default value: 0.
Associated variable: (V.)MPG.BKUPCOUN
This parameter indicates the number of PLC counters that are saved in RAM memory with
a battery. The CNC saves the first counters, from the first one to the one set in this parameter.
Non-volatile data means that their values must be maintained from one session to another
and after turning the CNC off. The CNC saves this data when the CNC is turned off, when
power is removed, when a hardware error occurs, etc.
2.3.33 Tool offset and wear.
TOOLOFSG
Sign criteria for tool offsets and tool wear.
Possible values: Positive / Negative.
Default value: Negative.
Associated variable: (V.)MPG.TOOLOFSG
This parameter sets the sign criteria for the offsets and their wear. The offsets are used to
define the tool dimensions in each axis. The dimensions of the turning tools are defined using
these offsets; either these offsets or tool length and radius may be used for the dimensions
of the rest of the tools.
In the tool table, it is possible to define whether the wear value being entered must be
incremental or absolute.
TOOLOFSG TOOLOFSG Meaning.
Negative. Tool calibration returns a negative offset. The offset wear
must be entered with a positive value.
Positive. Tool calibration returns a positive offset. The offset wear
must be entered with a negative value.