Fagor CNC 8060, Installation Manual

Page: 287 / 698

Installation manual.
CNC 8060
CNC 8065
MACHINE PA
RAMETERS.
2.
Machine parameters
for kinetics.
·287·
(R
EF
: 1709)
TDATA17
Rest position of the secondary rotary axis.
Possible values: Within ±99999.9999º.
Default value: 0.
The rest position is the one where the direction vector of the rotary axes of the kinematics
have been defined.
TDATA18
Turning direction of the secondary rotary axis.
Possible values: 0 (by the standard DIN 66217) / 1 (opposite to the standard DIN 66217).
Default value: 0.
See parameter TDATA8.
TDATA19
Secondary rotary axis, manual or servo-controlled.
Possible values: 0 (servo-controlled) / 1 (manual).
Default value: 0.
This parameter indicates whether the rotary axis is manual or servo-controlled.
TDATA20
Origin for applying the RTCP.
Possible values: 0 (machine zero) / 1 (part zero).
Default value: 0.
See parameter TDATA10.
TDATA31
Rotate the part coordinate system when rotating the table.
Possible values: 0 (yes) / 1 (no).
Default value: 0.
Having the RTCP mode active, this parameter determines whether the part coordinate
system is fixed on the part and rotates with it or it stays parallel to the machine coordinate
system.
TDATA31 Meaning.
0 When changing the part orientation, the position occupied by the tool tip on the
part does not change. The coordinate system is fixed on the part and rotates with
it.
1 When changing the part orientation, the position occupied by the point set as part
zero does not change. The coordinate system stays parallel to the machine
coordinate system.