Fagor CNC 8060, Installation Manual

Page: 114 / 698

Installation manual.
CNC 8060
CNC 8065
2.
MACHINE PA
RAMETERS.
Gen
e
ral machin
e parameters.
·114·
(R
EF
: 1709)
LASERFOLLOW1
Effect of the first of the X Y Z axes on the slave axis.
Possible values: No effect / Positive / Negative.
Default value: Not affected.
Associated variable: (V.)MPG.LASERFOLLOW1
Parameter included in the LASERFOLLOW table.
This parameter indicates if the first axis (according to the machine parameters) of the channel
that manages the compensation affects the slave axis, as well as its direction.
LASERFOLLOW2
Effect of the second of the X Y Z axes on the slave axis.
Possible values: No effect / Positive / Negative.
Default value: Not affected.
Associated variable: (V.)MPG.LASERFOLLOW2
Parameter included in the LASERFOLLOW table.
This parameter indicates if the second axis (according to the machine parameters) of the
channel that manages the compensation affects the slave axis, as well as its direction.
LASERFOLLOW3
Effect of the second of the X Y Z axes on the slave axis.
Possible values: No effect / Positive / Negative.
Default value: Not affected.
Associated variable: (V.)MPG.LASERFOLLOW3
Parameter included in the LASERFOLLOW table.
This parameter indicates if the third axis (according to the machine parameters) of the
channel that manages the compensation affects the slave axis, as well as its direction.
• If any of the parameters LASERFOLLOW1, LASERFOLLOW2 or LASERFOLLOW3 is
different from 0, the CNC will automatically update the variable V.A.FLWMASTER.xn of
the slave axis (LASERFOLLOWAXIS parameter) as follows.
• If parameters LASERFOLLOW1, LASERFOLLOW2 and LASERFOLLOW3 are 0, the
OEM should enter the value of the variable V.A.FLWMASTER.xn (e.g. from the PLC).
V.A.FLWMASTER.xn = V.MPG.LASERFOLLOW
V.MPG.LASERFOLLOW1 * V.A.TPOS.X +
V.MPG.LASERFOLLOW2 * V.A.TPOS.Y +
V.MPG.LASERFOLLOW3 * V.A.TPOS.Z