Fagor CNC 8060, Installation Manual

Page: 55 / 698

Installation manual.
CNC 8060
CNC 8065
SOFTWARE INSTALLATION.
1.
Softwa
re co
nfigu
ra
ti
on.
·55·
(R
EF
: 1709)
1.6 Software configuration.
The necessary files for the CNC are located in the following folder.
8060 CNC C:\FAGORCNC and its corresponding subfolders.
8065 CNC C:\CNC70 and its corresponding subfolders.
Folder. Contents.
BACKUPSDIR Backup of previous installations.
Every time the user installed a full new version, the installer saves a copy of
the previous installation in this folder.
CONFIGURATION MTB folders of the system.
This folder contains the various MTB folders of the system; MTB_T for lathe
and MTB_M for mill. When booting system and depending on the validation
code, the system will move the corresponding folder from CONFIGURATION
to MTB.
DIAGNOSIS Information for the diagnosis.
This folder contains relevant information for proper error diagnosis, including
the reportfagor.zip file.
DRIVERS CNC drivers.
This folder contains some necessary drives for proper operation of the CNC.
FAGOR Version folder.
This folder contains the software corresponding to the CNC version installed.
Software updates are carried out in this directory and they do not affect the
contents of directories MTB and USERS.
Do not change the contents of this directory. Only authorized personnel from
Fagor Automation may modify the contents of this directory. Fagor
Automation shall not be held responsible of the performance of this CNC if
the contents of this directory have been changed.
MTB OEM folder.
This folder is especially directed at machine manufacturers. This folder
contains the modifications made by the OEM at the CNC like, for example,
the PLC program, machine parameters, new screens, integrating external
applications, etc.
TMP Temporary files.
The CNC uses this folder to save the temporary files it generates while
operating. The CNC deletes the contents of this folder on power-up.
USERS User folder.
This folder is especially directed at users. The purpose of this folder is to
provide the user with a memory space for storing part-programs, profiles, etc.
as they are generated.
The CNC deletes the contents of the TMP folder on power-up. Do not use this folder to save files that
you'd like to keep.
i