Fagor CNC 8060, Installation Manual, Page: 263 / 698

Installation manual.
CNC 8060
CNC 8065
MACHINE PA
RAMETERS.
2.
Machine parameters
for kinetics.
·263·
(R
EF
: 1709)
2.9.3 Definition of the table kinetics (types 9 through 12).
The following types of rotary tables may be controlled.
TDATA2··TDATA5
Table dimensions.
The dimensions may be defined with a positive or negative value. The (+) sign in the
illustrations indicates that the direction is assumed as positive.
TDATA7
Origin for applying the RTCP.
Possible values: 0 (machine zero) / 1 (part zero).
Default value: 0.
This parameter indicates whether the CNC applies the RTCP referred to machine zero or
to part zero. For this type of kinematics it is recommended to set this parameter with a value
of ·1·.
TDATA8
Rest position of the main rotary axis.
Possible values: Within ±99999.9999º.
Default value: 0.
See parameter TDATA9.
TDATA2 It indicates the position of the secondary rotary axis or the intersection with
the primary axis along the X axis.
TDATA3 It indicates the position of the secondary rotary axis or the intersection with
the primary axis along the Y axis.
TDATA4 It indicates the position of the secondary rotary axis or the intersection with
the primary axis along the Z axis.
TDATA5 It indicates the distance between the secondary and the main rotary tables.
TDATA7=0 TDATA7=1
C=0º (machine coordinates) C=0º (machine coordinates)
C’=0º (part coordinates)
X
Y
C=0º
Y'
X'
X=X'
Y=Y'
C=0º
C'=0º