Fagor CNC 8060, Installation Manual

Page: 266 / 698

Installation manual.
CNC 8060
CNC 8065
2.
MACHINE PA
RAMETERS.
Machine parameters
for kinetics.
·266·
(R
EF
: 1709)
TDATA12
Manual rotary axes or servo-controlled.
Possible values: 0 to 3.
Default value: 0.
This parameter indicates whether the rotary axes are manual or servo-controlled.
TDATA16
Rotate the part coordinate system when rotating the table.
Possible values: 0 / 1.
Default value: 0.
Having the RTCP mode active, this parameter determines whether the part coordinate
system is fixed on the part and rotates with it or it stays parallel to the machine coordinate
system.
TDATA12 Meaning.
0 The two axes are servo-controlled.
1 Main axis manual and secondary axis servo-controlled.
2 Main axis servo-controlled and secondary axis manual.
3 The two axes are manuals.
TDATA16 Meaning.
0 When changing the part orientation, the position occupied by the tool tip on the
part does not change. The coordinate system is fixed on the part and rotates with
it.
1 When changing the part orientation, the position occupied by the point set as part
zero does not change. The coordinate system stays parallel to the machine
coordinate system.
B
TYPE=12
X
Y
Z
C
B
X
Y
Z
C
DATA 10 = 1
DATA 11 = 1
DATA 10 = 0
DATA 11 = 0
DATA 4(+)
DATA 3(+)
Y
Z
DATA 5(+)
DATA 2(+)
X
Z