Fagor CNC 8060, Installation Manual

Page: 591 / 698

Installation manual.
CNC 8060
CNC 8065
VOLUMETRIC COMPENSATION.
12.
Setup.
·591·
(R
EF
: 1709)
12.1.4 Sequence to define the values in the file.
Assuming a trihedron on the following axes.
VMOVAXIS1=X VMOVAXIS2=Y VMOVAXIS3=Z.
1 The first row corresponds to the point "X(P1), Y(P1), Z(P1)". This point corresponds to
the initial point of the volume to be compensated (parameters INIPOSAX1, INIPOSAX2
and INIPOSAX3).
2 The second row corresponds to the point "X(P2), Y(P1), Z(P1)", the third to point "X(P3),
Y(P1), Z(P1)", and so on until completing all the points of X (parameter NPOINTSAX1).
The distance between the points on the X axis is defined in the parameter INCREAX1.
3 Repeat the same operation to define all the points on the X axis, from the point Y(P2)
to the last point on the Y axis (parameter NPOINTSAX2). The distance between points
on the Y axis is defined in the parameter INCREAX2.
X
XYZ(P1)
X (INIPOSAX1)
Y (INIPOSAX2)
Z (INIPOSAX3)
Y
Z
X(P1) Y(P1) Z(P1)
1
X
XYZ(P1)
X(Pn)
X(P2)
X(P3)
X(P4)
Y
NPOINTAX1
Z
X(P2) Y(P1) Z(P1)
···
X(Pn) Y(P1) Z(P1)
2
XYZ(P1)
Y(P2)
X(P2)
X(P3)
X(P4)
X
Z
Y
X(Pn)
NPOINTAX1
Y(Pn)
NPOINTAX2
X(P1) Y(P2) Z(P1)
X(P2) Y(P2) Z(P1)
···
X(Pn) Y(P2) Z(P1)
···
X(P1) Y(Pn) Z(P1)
X(P2) Y(Pn) Z(P1)
···
X(Pn) Y(Pn) Z(P1)
3