Fagor CNC 8060, Installation Manual, Page: 580 / 698

Installation manual.
CNC 8060
CNC 8065
11.
CON
F
IGUR
ING AN AXIS.
Softw
a
re limits
o
f the axes.
·580·
(R
EF
: 1709)
11.6 Software limits of the axes.
The software limits set the travel limits for the axes to prevent the carriages from reaching
the mechanical hard stops. The carriages reach the hard stops when the reference point of
the tool holder is placed at the physical limits. The CNC lets set the software limits on linear
axes and on linearlike rotary axes.
The programmable positions of the axes depend on the dimensions of each tool. When
programming a position where the reference point of the tool holder is beyond the software
limits, the CNC interrupts the execution and shows the pertinent error message.
OM Machine zero.
T Reference point of the tool holder.
FL Physical limits.
SL Software limits applied by the CNC.
Programmable positions of the axes (they depend on the active tool).
T
SL
Z
X
Y
O
M
FL
Z
X
T
FL
SL
O
M