Fagor CNC 8060, Installation Manual

Page: 648 / 698

Installation manual.
CNC 8060
CNC 8065
15.
HARD
WARE.
Man
ageme
n
t of several keyb
oards.
·648·
(R
EF
: 1709)
Disable the keys.
Registers KEYDIS1, KEYDIS2 and KEYDIS3 inhibit (bit=1) the keys and the switches on
all operator panels at the same time.
Registers KEYDIS1_n, KEYDIS2_n and KEYDIS3_n inhibit (bit=1) the keys and the
switches on each operator panel. Registers KEYDIS1_1 to KEYDIS3_1 correspond to the
first jog panel, KEYDIS1_2 to KEYDIS3_2 to the second one and so on.
When selecting one of the inhibited positions of the feedrate override, the CNC will take the
value of the lowest position allowed. If all of them are inhibited, it will take the value of 0%.
Manage the LED's (lamps) of the keys.
Registers KEYLED1 and KEYLED2 control the LED's (lamps) of the keys of all the operator
panels at the same time.
Registers KEYLED1_n and KEYLED2_n control the LED's (lamps) of the keys of each
operator panel. Registers KEYLED1_1 and KEYLED2_1 correspond to the first jog panel,
KEYLED1_2 and KEYLED2_2 to the second one and so on.
Change the default behavior of the keyboards with respect to
the channels.
These registers may be used to change the default behavior of the keyboards with respect
to the channels, set by machine parameters. These registers can associate a jog panel with
a particular channel, always with the active channel or restore the configuration defined in
the machine parameters.
PLC marks and registers. Meaning.
KEYDIS1 to KEYDIS3 These registers inhibit (bit=1) the keys and the switches on all
operator panels at the same time.
KEYDIS1_1 to KEYDIS3_1
··
KEYDIS1_8 to KEYDIS3_8 These registers inhibit (bit=1) the keys and the switches on each
operator panel.
PLC marks and registers. Meaning.
KEYLED1 / KEYLED2 These registers control the LED's (lamps) of the keys of all the
operator panels at the same time.
KEYLED1_1 / KEYLED2_1
··
KEYLED1_8 / KEYLED2_8 These registers control the LED's (lamps) of the keys of each
operator panel.
PLC marks and registers. Meaning.
KEYBD1CH to KEYBD8CH These registers may be used to change the default behavior of the
keyboards with respect to the channels, set by machine parameters.
Value. Meaning.
0 Configuration defined in the machine parameters.
1 Jog panel assigned to channel 1.
2 Jog panel assigned to channel 2.
3 Jog panel assigned to channel 3.
4 Jog panel assigned to channel 4.
FF Jog panel assigned to the active channel.