Fagor CNC 8060, Installation Manual

Page: 653 / 698

Installation manual.
CNC 8060
CNC 8065
HARD
WARE.
15.
Assigni
ng a hel
p te
xt to
the
gra
phi
c softke
ys an
d to
the CNC status
ic
on.
·653·
(R
EF
: 1709)
15.3 Assigning a help text to the graphic softkeys and to the CNC status
icon.
The help texts are defined in the "SoftkeyHelper.txt" file and there could be a file per
language, they are saved in the "..\MTB \data \Lang" folder. The file is in text format and those
texts may be displayed and edited (and thus translated into other languages) using any text
editor.
Help text for the graphic softkeys.
The file is divided into sections, one per operating mode, each one of them contains the list
of softkeys and the help text associated with it. For example, for the automatic mode.
Help text for the CNC status icon.
In the "SoftkeyHelper.txt" file it is also possible to assign a help text to the icons that show
the CNC status, at the top of the screen.
These help texts are defined in the [HMI] section.
[AUTOMATIC MODE]
AUTO1=Select program
AUTO2=Prg in simulation
AUTO3=Inspection
AUTO4=Quit inspection
AUTO5=Reposition
AUTO6=Reposition block start
AUTO7=Execution mode
AUTO8=Cancel block
AUTO9=Graphics
[HMI]
HMI_NOREADY=
HMI_READY=
HMI_INEXECUTION=
HMI_INTERRUPTED=
HMI_INERROR=