Fagor CNC 8060, Installation Manual

Page: 201 / 698

Installation manual.
CNC 8060
CNC 8065
MACHINE PA
RAMETERS.
2.
Mac
h
ine parameters for
the
axes. Work sets.
·201·
(R
EF
: 1709)
MAXVOLT
Velocity command to reach G00FEED.
Parameter valid for linear and rotary axes and spindles.
Parameter valid for analog drives and velocity-Sercos drives.
Possible values: from 0 to 10000.0000 mV.
Default value: 9500 mV (9.5 V).
Associated variable: (V.)[ch].MPA.MAXVOLT[set].xn
Lathe and mill models.
This is the velocity command the CNC must output so the axis can reach its maximum rapid
traverse feedrate G00FEED.
Laser model.
This is the command the CNC must provide for the spindle to reach the maximum generator
power set in parameter G00FEED.
MAXFREQ
Frequency required to reach G00FEED.
Parameter valid for spindles.
Parameter valid for a Mechatrolink inverter.
Possible values: From 0.0010 to 10000.0000 Hz.
Default value: 50 Hz.
Associated variable: (V.)[ch].MPA.MAXFREQ[set].xn
When the drive is an inverter, this parameter indicates the frequency to be provided by the
CNC for the spindle to reach the speed set in parameter G00FEED.
MAXRPM
Maximum motor rpm.
Parameter valid for linear and rotary axes and spindles.
Parameter valid for a Mechatrolink speed and inverter.
Possible values: From 0 to 100000 rpm.
Default value: 3000 rpm.
Associated variable: (V.)[ch].MPA.MAXRPM[set].xn
Maximum motor rpm.