Fagor CNC 8060, Installation Manual

Page: 23 / 698

Installation manual.
CNC 8060
CNC 8065
·23·
(R
EF
: 1709)
Ref. 1512
Ref. 1603
Ref. 1604
Ref. 1702
Variables associated with the tool being prepared.
• Tool being prepared. Code of the tool offset type.
• Tool being prepared. Tool-holder orientation.
• Variable: (V.)G.TOOLTYP
• Variable: (V.)G.FIXORI
Variables related to the kinematics and coordinate transformation.
• Solution 2 is selected in instruction #CS or #ACS. • Variable: (V.)G.TORISOL2
General variables of the CNC.
• CNC model.
• CNC sub-version number (decimal value).
• Variable: (V.)G.CNCMODEL
• Variable: (V.)G.SUBVERSION
Variables associated with the part-program being executed.
• Number of the line of the program where the cursor is. • Variable: (V.)G.CURSORLINE
Variables related to the machine parameters of the channels.
• Orientation smoothing of the rotary axes working with RTCP. • Variable: (V.)MPG.ORISMOOTH
Variables related to managing the feedrate in HSC mode.
• Amount of error allowed on the axis for the HSC mode. • Variable: (V.)A.ACTROUND.xn
Software V01.40
Home search mode for position-Sercos axes. • Machine parameter: REFMODE.
Tandem axes. Torque control mode. • Machine parameter: TORQMODE.
Apply tool radius compensation in G00. • Machine parameter: G00COMP.
The default value of parameter CANMODE is now CANopen. • Machine parameter: CANMODE.
Work zones. • Machine parameter: ZONELIMITTOL.
• PLC mark: LIM(axis)OFF.
• Variable: (V.)G.ZONEST[k]
(V.)G.ZONETOOLWATCH[k]
(V.)G.ZONEWARN[k]
(V.)A.ZONELIMITTOL.xn
(V.)A.ZONELOWLIM[k].xn
(V.)A.ZONEUPLIM[k].xn
(V.)G.ZONECIR1[k]
(V.)G.ZONECIR2[k]
(V.)G.ZONER[k]
(V.)G.ZONECIRAX1[k]
(V.)G.ZONECIRAX2[k]
PLC. Asynchronous magazine. The TMOPERATION mark can take the value
of 16. • PLC mark: TMOPERATION.
Software V01.45
Safe probing cycles. • PLC mark: PROBE1MONIT,
PROBE2MONIT.
Probe enabled. • PLC mark: PROBE1ENA,
PROBE2ENA.
Software V01.50
Number the digital inputs of the CANopen bus based on logic blocks. • Machine parameters: NDIMOD
DIMODADDR
NODE
BLOCK
ADDRESS
NDI
Number the digital outputs of the CANopen bus based on logic blocks. • Machine parameters: NDOMOD
DOMODADDR
NODE
BLOCK
ADDRESS
NDO
Enable/disable a PT100 input from the PLC. • PLC mark. PT100OFF1..PT100OFF20
New management of M06 in turret-type magazines • Function: T and M06.
Software V01.50.50
Laser model.
Laser. Laser status. • PLC mark. LASERON
SHUTTERON
LASERREADY
Laser. Default pressure units. • Machine parameters: PRESSURE
Software V01.30