Fagor CNC 8060, Installation Manual, Page: 70 / 698

Installation manual.
CNC 8060
CNC 8065
2.
MACHINE PA
RAMETERS.
Gen
e
ral machin
e parameters.
·70·
(R
EF
: 1709)
TCOMPLIM
Tandem pair. Compensation limit.
Possible values: from 0 to 100%.
Default value: 0 (disables the tandem axis).
Associated variable: (V.)MPG.TCOMPLIM[nb]
Parameter included in the TANDEM table.
This parameter limits the maximum compensation applied by the tandem. This limit is also
applied to the integral.
This parameter refers to the master motor. It is defined as percentage of the maximum speed
of the master motor. If programmed with a "0" value, the output of the tandem control will
be zero, thus disabling the tandem.
TORQMODE
Tandem pair. Torque control mode.
Possible values: With torque control / Without torque control.
Default value: With torque control.
Associated variable: (V.)MPG.TORQMODE[nb]
Parameter included in the TANDEM table.
This parameter indicates whether the CNC takes the torque into account when managing
the tandem. This parameter should be set to its default value.
T.mst Torque of the master motor.
T.slv Torque of the slave motor.
T.err T.mst – T.slv PRELOAD + +
 
=