Fagor CNC 8060, Installation Manual, Page: 639 / 698

Installation manual.
CNC 8060
CNC 8065
SUBROUTINES.
14.
User su
broutin
es a
s
so
ciated
with function
s G500
to G5
99.
·639·
(R
EF
: 1709)
14.18 User subroutines associated with functions G500 to G599.
The CNC lets the uses define up to 100 subroutines, common to all channels and that will
be associated with functions G500 through G599, so when the CNC executes one of these
functions, it will execute its associated subroutine. These OEM subroutines may be executed
either in a non-modal or modal way and it also allows resetting the local parameters of the
subroutine.
These subroutines are loaded into RAM memory when they are executed for the first time.
If there is no room in RAM, the CNC will issue a warning and it will execute the subroutine
from the disk. At the end of the program (M30), if no other channel is executing subroutines,
the CNC deletes them from its RAM memory. This way, if a user subroutine is edited or
modified, the CNC assumes the changes the next time it executes it.
Subroutines supplied by Fagor.
14.18.1 Configure the subroutines.
Name and location of the subroutine.
The subroutines associated with functions G500 to G599 will have the same name as the
function (without an extension) and they will be saved in the folder ..\Users\Sub.
G500 will have subroutine G500 associated with it.
G501 will have subroutine G501 associated with it.
· · ·
G599 will have subroutine G599 associated with it.
Subroutine. Meaning.
G500 HSC cancellation.
G501 HSC activation for roughing operations.
If this version is updated, the CNC behaves as follows.
• For the two first two installation options, the CNC will only copy the subroutines in the folder
..\Mtb\Sub if they do not already exist.
• In the third installation option, "rename previous version and install it completely", the CNC always
updates the subroutines.