![background image](http://html1.mh-extra.com/html/ducati/superbike-749r-2006/superbike-749r-2006_manual_2537770141.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Uso e manutenzione
Use and Maintenance operations
sezione / section
D 5
67
749R
- M.Y. 2006 - edizione/edition 00
Controllo pressione
carburante
Note
I simboli delle icone utilizzate
nella procedura sono riportati in una
tabella alla fine della presente sezione.
Prima di eseguire questa operazione
è necessario procedere al distacco
dell’assieme serbatoio - sella - codone
(Sez. E 3) dal veicolo, senza
rimuoverlo.
Alzare leggermente il serbatoio
installando sotto di esso un tampone
in modo tale da poter operare sui
raccordi della flangia.
Per verificare la pressione carburante
utilizzare il tubo pressione
carburante (17).
Rimuovere il raccordo del tubo di
mandata (D) sul lato sinistro della
flangia.
Utilizzare il tubo pressione
carburante (17) collegandone
un'estremità (G) al serbatoio e
l'altra (F) sul raccordo del tubo
mandata (D): in questo modo si
crea una presa (H) di pressione.
Collegare il sensore pressione (5),
alla presa (H) del tubo (17), per
trasformare il segnale di pressione
in segnale elettrico.
Accendere lo strumento DDS (1)
facendo riferimento al paragrafo
“Alimentazione dello strumento”.
Collegare il cavo alimentazione
e diagnosi (Modulo Misure) (3)
al connettore modulo misure (E)
dello strumento DDS (1).
Collegare il sensore pressione (5)
alla presa (A) o (C) del cavo (3).
Fuel pressure test
Notes
The on-screen icons used
during this procedure are explained in
a table at the end of this section.
Before carrying out this procedure,
you need to detach the fuel tank-seat-
cowling assembly (Sect. E 3) from the
motorcycle but without removing it.
Slightly raise the fuel tank and place a
pad underneath it so as to be able to
access the fittings on the flange.
To test the fuel pressure use the fuel
pressure test pipe (17).
Remove the fuel tank outlet pipe (D)
on the left side of the flange.
Connect one end (F) of the fuel
pressure test pipe (17) to the outlet
pipe fitting and the other end (G) to
the tank (D) in this way, the fuel
pressure can be measured at the test
outlet (H).
Connect the pressure sensor (5) to
the test outlet (H) of the pipe (17) to
transform the pressure signal into
an electrical signal.
Switch on the DDS tester (1);
see heading “Tester Power Supply”.
Connect the power and
diagnostics cable (Measurement
Module) (3) to the measurement
module connector (E) on the DDS
tester (1).
Connect the pressure sensor (5)
to socket (A) or (C) of the cable (3).
D
E
G
F
H
17
D
F
17
A
5
552.1.039.1A
E
1
3
Summary of Contents for Superbike 749R 2006
