![background image](http://html1.mh-extra.com/html/ducati/superbike-749r-2006/superbike-749r-2006_manual_2537770226.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Ruote – Sospensioni – Freni
Wheels – Suspensions – Brakes
sezione / section
G 5
26
749R
- M.Y. 2006 - edizione/edition 00
Use the same tool to fit the new seal
rings (6), positioned as shown in the
sectional view, so that they seat
against the newly installed roller
bearings.
For installing the ball bearing races (9)
you will need tool part
no.
88713.2409
comprised of:
(A) - drift for internal bearings;
(A) - drift for external bearings;
(C) - guide pin.
Fit a new bearing (9) with the internal
spacer (10) onto the drift (A) and
position it on the interior of the right-
hand side support of the swingarm.
Insert the guide pin (C) into the
previously mounted roller bearings
and insert the other end in the bore in
the tool (A).
Drive the bearing (9) fully into the
swingarm.
Fit the other new bearing (9) at the
outer end of tool (A).
Using tool (A) as a stop, use tool (B) to
drive the external bearing up against
the spacer (10): remove the tools.
Before reinstalling the swingarm (18),
grease the ball bearings (9), roller
bearings (7) and seal rings (6) with the
recommended grease.
Utilizzando lo stesso tampone inserire
gli anelli di tenuta (6) nuovi, disposti
come in sezione, accostandoli agli
astucci appena montati.
Per il montaggio dei cuscinetti a
sfere (9) è necessario disporre
dell’attrezzo cod.
88713.2409
composto da:
(A) - tampone per cuscinetto interno;
(B) - tampone per cuscinetto esterno;
(C) - perno di guida.
Introdurre un cuscinetto (9) nuovo
e il distanziale interno (10) sul
tampone (A) e posizionarlo sul lato
interno del supporto lato destro del
forcellone.
Inserire il perno di guida (C) negli
astucci precedentemente montati e
inserire l’estremità nel foro interno
del tampone (A).
Portare in battuta il cuscinetto (9)
sul forcellone.
Inserire l’altro cuscinetto nuovo (9)
all’estremità esterna del tampone (A).
Contrastare con il tampone (A) e,
utilizzando il tampone (B), portare
in battuta il cuscinetto esterno sul
distanziale (10): sfilare gli attrezzi
utilizzati.
Prima del rimontaggio del
forcellone (18) è necessario
lubrificare con grasso prescritto i
cuscinetti (9), gli astucci a rullini (7)
e gli anelli di tenuta (6).
6
C
C
88713.2409
10
18
6
7
6
C
A
9
10
A
B
9
C
Summary of Contents for Superbike 749R 2006
