![background image](http://html1.mh-extra.com/html/ducati/superbike-749r-2006/superbike-749r-2006_manual_2537770590.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Impianto elettrico
Electric system
sezione / section
P 8
76
749R
- M.Y. 2006 - edizione/edition 00
- entro 15 secondi occorre
rimuovere la chiave nera, reinserire
la chiave rossa e mettere il
blocchetto avviamento su ON. Sul
display multifunzione compare il
numero di chiavi inserite (in questo
caso “4”) e il conto alla rovescia
con partenza da 30
- accertarsi che il conto alla rovescia
sia partito e prima che termini
portare la chiave su OFF. Se la
programmazione è andata a buon
fine il led (A) sul quadro strumenti
lampeggia.
Giunti a questo punto della procedura
della programmazione, sono state
programmare due chiavi nere e
il decodificatore nel cruscotto.
La procedura va continuata nel
seguente modo:
- entro 15 secondo portare il
blocchetto avviamento su ON con
la chiave rossa. Il simbolo CODE
sul display multifunzione del
quadro strumenti si spegne
- lasciare la chiave in posizione ON
per non meno di 5 secondi e non
più di 15, per consentire il
trasferimento dei dati dal
decodificatore alla centralina
controllo motore e
successivamente posizionare la
chiave su OFF
- attendere 10 secondi prima di
portare il blocchetto avviamento
ancora su ON
La procedura della programmazione
è terminata. Il sistema immobilizer è
stato completamente programmato.
Nel caso in cui si dovesse
programmare anche un solo elemento
del sistema immobilizer, la procedura
indicata va effettuata completamente
e mai parzialmente. Al termine
della procedura verificare il corretto
avviamento del motore con le chiavi
nere.
Attenzione
Se durante la procedura di
programmazione compare sul display
multifunzione la scritta “OFF”,
significa che la programmazione
è stata interrotta. Ripetere la
procedura dall'inizio. Per effettuare
correttamente la programmazione
dell'immobilizer è importante
rispettare scrupolosamente i vincoli di
tempo e le altre condizioni indicate.
A
- Remove the black key within
15 seconds, insert the red key
again and turn the switch to ON.
The display will show the number
of keys inserted (“4” in this case)
and start a countdown from 30.
- Check that the countdown has
started and turn the key to OFF
before it terminates. If the
programming sequence has
terminated successfully, the led (A)
on the instrument panel will flash.
At this point the two black keys and
the instrument panel decoder have
been successfully programmed.
Continue the procedure as follows:
- turn the ignition to ON with the red
key within 15 seconds. The CODE
symbol on the display will switch
off.
- Leave the key in the ON position
for at least 5 seconds and no more
than 15 seconds, to allow the data
to transfer from the decoder to the
engine ECU and then turn the key
to OFF.
- Wait for 10 seconds, then turn the
ignition switch to ON again.
The programming procedure is now
terminated. The immobiliser system
has been completely programmed.
Even if you need to program only
one component of the immobiliser
system, always run the entire
procedure. At the end of the
procedure, check that the engine
can be started with the black keys.
Warning
If display shows the message
“OFF” during the procedure, this
indicates that the programming
routine has been aborted. Repeat the
procedure from the beginning.
To ensure that the immobiliser is
correctly programmed, you must
scrupulously observe the timings
and other conditions indicated.
Summary of Contents for Superbike 749R 2006
