Docomo P-07A Prime Series, Instruction Manual

Page: 584 / 617

19
This section explains how to set up a connection for packet communication without using “DOCOMO
Connection Manager”.
The packet communication uses AT commands to carry out the settings from a personal computer. To
specify settings, communication software to enter AT command is required. “Hyper Terminal”, which is
attached to Windows as the standard software, is used here for explanation.
When using DOCOMO Internet access service “mopera U” or “mopera”, you do not need to set an access
point name (APN) (see page 21).
You can set “caller ID notified/not notified” (see page 24) as required. (You need to set “caller ID notified”
when using “mopera U” or “mopera”.)
<Packet communication setting flow using AT commands>
To manually carry out the communication setting, you need to specify a COM port number, which is
assigned to “FOMA P07A” (modem) embedded after you install the “FOMA communication configuration
file” (driver).
The confirmation method varies depending on the operating system of your personal computer.
≥
When using DOCOMO Internet access service “mopera U” or “mopera”, you do not need to set an access point name (APN);
therefore, you do not need to confirm the modem.
1
“ [ スタート (Start)]”
1
Open “ コントロールパネル (Control panel)”.
2
From “
ハードウェアとサウンド
(Hardware and sound)” in “
コントロールパ
ネル
(Control panel)”, open “
電話とモデムのオプション
(Phone and
modem options)”.
3
If the “ 所在地情報 (Address information)” display appears, enter
“
市外局番/エリアコード
(City code/Area code)”, then click “OK”.
Setting Dial-up Network
Set Packet Communication
Confirm the COM port number (See page 19)
Start the communication software that enables the entry of AT commands (See step 3 on page 21)
Set an access point name (APN) (See step 7 on page 22)
Set “caller ID notified/not notified” (See step 2 on page 24)
Set others (See page 37)
Exit the communication software (See step 9 on page 23)
■
AT commands
≥
The AT commands are used to control a modem. The FOMA terminal, which conforms to the AT commands, supports some extended
commands and unique AT commands.
≥
By entering AT commands, you can carry out detailed setting for packet communication and FOMA terminal, and confirm (display) the
setting contents.
≥
If the entered AT command is not displayed, enter “ATE1 ”.
Confirm COM Port Number
For Windows Vista
Continued to Next Page