Docomo P-07A Prime Series, Instruction Manual

Page: 426 / 617

424
Co
nv
eni
e
n
t Fu
nc
ti
on
s
When you connect your FOMA terminal to a Bluetooth device using
Audio service, you can output the audio of 1Seg programs from the
Bluetooth device.
1
Connect a Bluetooth device using Audio service.
≥
See page 421 for connecting to a Bluetooth device.
2
Watch a 1Seg program.
The sound is output from the Bluetooth device.
≥
Once you connect the FOMA terminal to the Bluetooth device using Audio
service, a connection history is stored. When the connection history is found, the
FOMA terminal tries to connect to the Bluetooth device automatically for watching
a 1Seg program even if it is not connected using Audio service. When the
connection is successfully completed, the audio is output from the Bluetooth
device. When the connection fails, the confirmation display appears asking
whether to output audio from the FOMA terminal.
The connection history is overwritten each time the Bluetooth device is connected
using Audio service.
≥
For operations from a Bluetooth device, refer to the instruction manual for the
Bluetooth device.
≥
When the Bluetooth communication is disconnected during a call on the Bluetooth
device, the call state follows the setting of “Disconnection settings”. However, when it
is disconnected while the FOMA terminal is closed and “Disconnection settings” is set
to “Continue on the phone”, the call shifts to the state as specified by “Setting when
closed”. When “Setting when closed” is set to “End the call”, the call shifts to “No tone”
state.
Play Back Audio of 1Seg Programs
Information
Information
≥
You can output the audio of 1Seg programs only on an A2DP compatible Bluetooth
device that supports copyrighting by the SCMS-T.
≥
While the audio of a 1Seg program is output from a Bluetooth device, you cannot
adjust the sound volume of the Bluetooth device by adjusting that on your FOMA
terminal.
≥
You cannot output the audio from the Bluetooth device when an earphone/
microphone (option) is connected.
When you connect your FOMA terminal to a Bluetooth device using
Audio service, you can output the sound of i-motion files, movie files and
videos, and music via MUSIC Player, etc., from the Bluetooth device.
1
Connect a Bluetooth device using Audio service.
≥
See page 421 for connecting to a Bluetooth device.
≥
If you connect using Audio service from the Bluetooth device while placing an
Audio service on standby for connection, MUSIC Player starts automatically.
However, it does not automatically start when “MUSIC Player autostart” is set to
“OFF”. Further, it might not automatically start when a display other than the
Stand-by display is shown or another function is activated.
≥
If the audio from a 1Seg program stops while it is output on the Bluetooth device,
check your FOMA terminal as the possible causes are as follows:
･ When the Bluetooth device is disconnected
･ When a location provision request of GPS comes in
･ When a mail message or Message R/F comes in
･
When a PushTalk call comes in
･ When the low battery alarm sounds
･ When an alarm for “Alarm”, “Schedule”, “ToDo”, “TV timer” or “Timer recording”
sounds
In these cases, the Audio service might be disconnected depending on the Bluetooth
device. To resume playback on the Bluetooth device, you need to re-connect the
Audio service.
Play Back Music, Sound of i-motion, Movie, Video Files, etc.
Information