Docomo P-07A Prime Series, Instruction Manual

Page: 470 / 617

468
PC Co
nn
e
c
ti
on
The following three ways are available for connecting the FOMA terminal to
another device:
Connect the FOMA terminal to a personal computer provided with the USB port
using the FOMA USB Cable with Charge Function 01/02 (option).
This way of connection applies to all communication systems such as packet
communication, 64K data communication, and data transfer.
≥
Set “USB mode setting” to “Communication mode”. (See page 376)
≥
You need to install the “FOMA communication configuration file” (driver) before use.
Connect a Bluetooth communication compatible personal computer wirelessly to
the FOMA terminal. This way of connection applies to packet communication and
64K data communication.
≥
When you perform data communication by using Bluetooth function, the high speed
communication is applied to the FOMA terminal. However, you may not be able to
communicate at the maximum speed because of the limit of communication speed of
Bluetooth function.
≥
Use a Bluetooth linked standard modem or a Bluetooth modem provided by the
Bluetooth device maker. Contact the maker of your personal computer or Bluetooth
device maker for how to install and to set up.
By using infrared rays, you can send/receive data between your FOMA terminal
and another FOMA terminal, mobile phone, or personal computer provided with
the infrared communication function. (See page 380)
This applies only to data transfer.
Information
≥
Use a dedicated “FOMA USB Cable with Charge Function 01/02” or “FOMA USB
Cable”. The USB cable for personal computers cannot be used because the shape of
the connector differs.
≥
If you use a USB hub, the devices may not work correctly.
Connect FOMA Terminal to Other Devices
Use FOMA USB Cable with Charge Function 01/02
Use Bluetooth communication
Use Infrared communication
When you use the FOMA USB Cable with Charge Function 01/02 (option),
install the “FOMA communication configuration file” (driver).
Setup Flow for Data Transfer
(OBEX™ Communication)
Download and install the “FOMA communication configuration file” (driver).
≥
Install the FOMA communication configuration file from the provided CD-ROM or
download them from the DOCOMO website and install.
Data transfer