Docomo P-07A Prime Series, Instruction Manual

Page: 419 / 617

417
Co
nv
e
n
ie
nt Fu
nc
ti
on
s
For when the Stereo Earphone Set 01 (option) is connected, you can
select which microphone you use between the microphone of the FOMA
terminal and of the earphone/microphone.
1
m
1
Set./Service
1
Other settings
1
Headset mic. setting
1
Built-in microphone or Headset microphone
1
Enter a phone number
or
call up a Phonebook entry, redial item, dialed call record,
or received call record.
2
Press and hold the switch of the Stereo Earphone Set for
at least one second
1
Start talking when the other party answers.
A beep sounds and you are connected.
≥
You can use this function even in Horizontal Open Style. However, you cannot
make a videophone call by pressing the switch of the Stereo Earphone Set.
≥
You can make a call also by operating the FOMA terminal.
3
After talking, press and hold the switch of the Stereo
Earphone Set for at least one second to end the call.
A beep sounds twice and you are disconnected.
<Headset Microphone Setting>
Selecting a Microphone for Use when an
Earphone is Connected
Information
≥
When you connect earphones without a microphone, select “Built-in microphone”.
≥
When you connect the Stereo Earphone Set while “Built-in microphone” is set, the
sensitivity of the microphone of the FOMA terminal is improved.
Make Calls Using the Switch
1
During ringing
1
Press the switch of the Stereo Earphone Set.
A beep sounds and you are connected.
With a videophone call, the image through your camera is sent to the other party.
You can switch between that image and the substitute image by pressing
m
during the videophone call. (See page 75)
≥
You can use the switch also with the FOMA terminal closed or in Horizontal Open
Style.
≥
You can answer calls also by operating the FOMA terminal.
≥
When “Auto answer setting” is set to “ON”, a call is answered automatically after
the ring time elapses.
2
After talking, press and hold the switch of the Stereo
Earphone Set for at least one second to end the call.
A beep sounds twice and you are disconnected.
Receive Calls Using the Switch
Information
≥
Regardless of the setting for “Keypad sound”, a tone for connecting and disconnecting
the line sounds.
≥
Note that you might receive a call if you connect the Stereo Earphone Set after the
ring tone sounds.
≥
By pressing the switch of the Stereo Earphone Set during answer-hold (On Hold) or
while a call is on hold (Holding), you can release the hold. (While a videophone call is
put on hold, the image through your camera is sent and the videophone call starts.)
≥
Do not press and release the switch of the Stereo Earphone Set in succession. You
might automatically receive a call.
≥
If you have signed up for Call Waiting Service and “Multi calling” is displayed during a
call, you can switch two calls by pressing and holding the switch of the Stereo
Earphone Set for at least one second. However, you cannot use the switch to end the
call.
≥
You can adjust the earpiece volume by pressing
. <
(raise) or
. >
(lower) during a call.