Docomo P-07A Prime Series, Instruction Manual

Page: 335 / 617

333
Ma
p
/GP
S Fu
nc
ti
on
GPS button setting You can set a function which is performed after measuring
your location by pressing and holding
1
for at least one
second from the vertical Stand-by display. You can select a
function from the “Function Menu while Current Location is
Displayed” on page 329.
1
Select a function.
≥
If you set to “Confirm every session”, you can select a
function each time you measure the location.
Posit. tone/illum. See page 333.
Positioning mode You can select a mode for measuring the current location from
either “Standard mode” or “Quality mode”.
When you select “Quality mode”, it takes a longer time to
measure, but the measuring accuracy might be improved as a
result.
You can set a positioning mode for Position Location, Notify of
Location, and Provide Location respectively.
1
Select an operation to be set
1
Standard mode or Quality mode
Reg. LCS client See page 334.
Location request set. See page 334.
Service settings By accessing GPS service settings (a host set by “Host
selection”), you can configure the settings for the Provide
Location service such as the password and search permission
for location information.
≥
See page 197 for operations while a site is displayed.
However, you cannot use the Bookmark or Screen Memo
function.
≥
When you access from overseas, the error display appears
and you cannot use this function. However, you are charged
a packet communication fee.
Host selection See page 336.
You can select a tone to sound for when you check your current location
or when you are requested to provide location information. You can set a
color of the Call/Charging indicator and the vibration pattern as well.
1
m
1
LifeKit
1
Map/GPS
1
GPS settings
1
Posit. tone/illum.
1
Select an operation to be set
1
Do the following operations.
Positioning Tone/Illumination
Select posit. ring
tone
1
Select a folder
1
Select a ring tone.
≥
While selecting a ring tone, you can check the selected tone.
Ring time setting You can set a ring time for positioning ring tone.
1
Enter a ring time (seconds).
≥
Enter two digits from “00” through “30”. For “Location req./
Confirm”, however, enter two digits from “00” through “20”.
If you set to 0 seconds, the tone does not sound.
Select vibrator
1
Select a vibration pattern.
≥
If you select “Melody linkage”, the FOMA terminal vibrates in
time with ring tone.
≥
While selecting a vibration pattern, you can check the selected
vibration.
Select illumination
1
Select an item.
≥
While selecting an item, you can check the lighting/flickering of
the Call/Charging indicator.