Docomo P-07A Prime Series, Instruction Manual

Page: 192 / 617

190
Mail
5
OK
Information
≥
Depending on the radio wave conditions, the characters might not be sent
successfully to the destination.
≥
When the sent mail messages exceed the maximum number/size of storage, they are
deleted from the oldest one. However, protected sent mail messages are not deleted.
≥
You cannot compose an SMS message when sent mail messages in the Outbox are
saved to the maximum number/size of storage and all of them are protected, when 20
draft mail messages are saved, or when the Draft is full.
Release the protection for sent mail messages, or send/delete draft mail messages,
and then operate again.
≥
Even if “Activate/Deactivate” of “Caller ID notification” is set to “Deactivate”, the caller
ID is notified to the other party you send an SMS message to. If you attempt to send
an SMS message to the phone number headed by “184”/“186”, the confirmation
display appears asking whether to delete prefix numbers and send the mail.
≥
If you set “SMS report request” to “ON”, you cannot send SMS messages to the
i-mode phone of the mova service.
≥
“+” is valid only at the beginning of the address.
≥
You cannot send the message to addresses that include any characters other than
numbers, “#”, “
:
” and “+”.
≥
You cannot start a new line while editing the text.
≥
The special symbols (see page 501) are replaced by half-pitch spaces.
≥
Each space is counted as a character.
≥
You cannot reply to the SMS message whose sender is User unset/PublicPhone/
Unavailable.
≥
In B Mode of 2in1, you cannot compose SMS messages.
Function Menu of the SMS Composition Display
Send You can send the SMS message.
Go to step 5 on page 190.
Preview Before sending, you can check the address and the text contents.
≥
Press
l
( ) to send the SMS message.
You can save up to 2,500 received SMS messages including i-mode mail
messages.
≥
You can move/copy the received SMS messages to the UIM. (See page 415)
1
When an SMS message arrives,
“ (pink)” lights and the message
telling its arrival appears.
When receiving ends, the display shows the number of
received SMS messages.
≥
You can display the Inbox list by selecting “Mail”.
≥
If no keys are pressed for about 15 seconds, “ ” (see page 30) appears on
the desktop and the former display returns. (The transit time varies depending on
the setting for “Mail/Msg. ring time”.)
Press
O o
, highlight “ ”, and press
O o
( ) to display the Inbox list.
≥
See page 34 for when the FOMA terminal is closed.
Save You can save the SMS message you are composing or editing to
the Draft.
≥
You cannot save the message when the address field and text
field are blank.
SMS report req. See page 191.
SMS valid. per. See page 191.
SMS input char. See page 192.
<Receive SMS>
Receiving SMS Automatically
Reception Result
display
Information
≥
When the unread or protected messages in the Inbox has reached the maximum
number/size of storage, no new messages can be received and “
(dark blue)” is
displayed. To receive SMS messages, delete mail in the Inbox or read unread mail or
release protection until “
(dark blue)” clears, and then perform “Check new SMS”.
≥
When you receive concatenated SMS messages, they are displayed on the Inbox list
in order of arrival at the FOMA terminal.