Docomo P-07A Prime Series, Instruction Manual

Page: 65 / 617

63
Vo
ice
/V
id
e
o
pho
ne
Cal
ls
/P
u
sh
Ta
lk
2
i
( )
1
Prefix numbers
1
Select a name
1
d
or
O o
( )
≥
Press
l
( ) to make a videophone call and press
p
to make a PushTalk
call.
≥
For making a PushTalk call, adding a prefix number such as “186” or “184” to the
beginning of the phone number is disabled.
You can set whether to regard the numbers after “
:
” of a phone number
as a sub-address to access the specified phones or data terminals.
≥
The sub-address is a number assigned to identify each ISDN terminal connected to an
ISDN line. It is also used for selecting contents on “V-live”.
1
m
1
Set./Service
1
Other settings
1
Sub-address setting
1
ON or OFF
You can set an alarm that sounds until a voice call, videophone call, or
PushTalk communication is reconnected after disconnected owing to
bad radio wave conditions.
1
m
1
Set./Service
1
Talk
1
Reconnect signal
1
Select an alarm.
<Sub-address Setting>
Making a Call Specifying a Sub-address
Information
≥
Even if you set “Sub-address setting” to “ON”, “
:
” at the top of phone numbers and
“
:
” immediately after the prefix number or “186”/“184” are not regarded as
sub-address mark-off symbols.
+ m - 7 - 7
<Reconnect Signal>
Setting Alarm for Reconnecting
The volume of the other party’s voice is turned up according to the
surrounding noise during a call. This setting is effective only when the
other party’s voice is output from the earpiece.
1
m
1
Set./Service
1
Talk
1
Shikkari Talk
1
ON or OFF
The noise sent to the other party is reduced according to the surrounding
noise during a call.
1
m
1
Set./Service
1
Talk
1
Noise reduction
1
ON or OFF
1
During a voice call
1
m
( )
While Yuttari Talk is activated, “ ” is displayed.
≥
Press
m
( ) again to return to the normal speed.
Information
≥
The reconnectable time differs depending on the usage status and radio wave conditions.
An estimate is about 10 seconds and the call charge is applied also for that duration.
≥
While you are disconnected, no sound is transmitted to the other party.
<Shikkari Talk>
Making Voice Clear According to
Surrounding Noise
+ m - 7 - 6
<Noise Reduction>
Reducing Surrounding Noise to Make
Voice Clear
<Yuttari Talk>
Slowing Down the Other Party’s Speaking
Speed
Information
≥
Yuttari Talk is effective only during a current voice call. The speaking speed returns to
normal one when you end the call, switch calling parties during Multi calling, or switch
from the voice call to a videophone call.