Docomo P-07A Prime Series, Instruction Manual

Page: 59 / 617

57
Vo
ice
/V
id
e
o
pho
ne
Cal
ls
/P
u
sh
Ta
lk
A Chaku-moji message is displayed below a caller. The
Chaku-moji message is stored in Received Calls as well.
≥
The Chaku-moji message is displayed only during ringing. It
is not displayed during a call.
≥
Even when a Chaku-moji message comes in within the ring
start time set by “Ring time”, it is received and recorded in
Received Calls.
≥
The Chaku-moji message is not displayed during Lock All, Omakase Lock, or Personal
Data Lock. However, you can check the Chaku-moji message from Received Calls
after the lock is released.
You can store up to 10 Chaku-moji messages in the Message list.
1
m
1
Set./Service
1
NW services
1
Chaku-moji
1
Create message
1
Highlight <Not stored> and press
l
( )
1
Enter a message.
≥
To edit a stored message, highlight it and press
l
( ).
≥
You can enter up to 10 characters regardless of whether they are pictograms,
symbols, or full-pitch/half-pitch characters.
1
Enter a phone number
or
call up the detailed display of a Phonebook entry, redial
item, dialed call record, or received call record.
2
i
( )
1
Chaku-moji
1
Do the following operations.
When a message is received
Store Messages
Make a Call with a Message
Create message You can create a Chaku-moji message just before dialing.
1
Enter a message.
≥
You can enter up to 10 characters regardless of whether they
are pictograms, symbols, or full-pitch/half-pitch characters.
≥
The Chaku-moji message created using this function is not
stored in the Message list.
Select message From the Message list, you can select a stored message.
1
Select a message.
3
Press
d
or
O o
( ).
≥
Press
l
( ) to make a videophone call.
≥
The Chaku-moji message being sent is displayed while you are dialing.
Sent messages From the Sent Message list, you can select a Chaku-moji
message to be sent. Up to 10 sent Chaku-moji messages only
are stored in the Sent Message list. If you send the same
Chaku-moji message, the older one also remains. When the
number of sent Chaku-moji messages exceeds 10, the
messages are deleted from the oldest one.
1
Select a sent message.
Information
≥
When a Chaku-moji message has arrived at the other party’s phone, “Transmission
completed” is displayed, and you are charged a transmission fee.
≥
When a Chaku-moji message does not arrive at the other party’s phone such as when
the other party’s phone is not a Chaku-moji compatible mobile phone or the call is not
allowed by “Message disp. settings” at the receiving end, “Transmission failed” is
displayed. In this case, you are not charged a transmission fee.
≥
Depending on the radio wave conditions, the transmission result may not be
displayed at the sending end even if a Chaku-moji message has arrived at the other
party’s phone. In this case, you are charged a transmission fee.
≥
Even if you make a call sending a Chaku-moji message, the Chaku-moji message is
not displayed and you are not charged a transmission fee (the call is not recorded in
Received Calls at the receiving end) when the other party’s phone is out of the service
area, turned off, during Public mode (Drive mode), or the ring time for Record
Message Setting is set to 0 seconds. Also, the transmission result is not displayed at
the sending end.
≥
When a videophone call is not connected and automatically dialed as a voice call, the
Chaku-moji message is resent as well.
≥
Chaku-moji does not support PushTalk.
≥
You cannot send/receive Chaku-moji messages overseas.