Docomo P-07A Prime Series, Instruction Manual

Page: 5 / 617

3
Easy
Search
/Co
n
ten
ts
/Precau
tio
n
s
400
Co
nve
ni
ent
Fu
nct
ion
s
You can set Alarm to alert you at the specified time with an alarm tone,
animation and illumination. You can store up to 12 alarms.
1
m
Stationery Alarm Highlight an
alarm and press
l
( )
Do the following operations.
2
Press
l
( ).
+ m - 4 - 4
<Alarm>
Using Alarm
Alarm You can set whether to validate or invalidate the alarm.
ON or OFF
Time Enter the time for sounding the alarm.
p You cannot set the same time as the time set for the stored
alarm.
Tone Select a type of alarm tone Select a folder
Select an alarm tone.
Volume Use
B o
to adjust the volume.
p If you set “Step”, the alarm tone is silent for about three
seconds, and then the volume steps up every about three
seconds, from Level 1 through Level 6.
Prefer manner
mode
You can set the alarm tone which sounds at the specified time
during Manner Mode.
ON or OFF
ON. . . . . Sounds at the same volume as set for “Alarm volume”.
OFF. . . . Sounds at the volume set for this function.
The icon appears on the Stand-by display.
“
” . . . Displayed when an alarm is set for today (except the setting for past time).
“ ” . . . Displayed when an alarm is set for tomorrow or onward only.
p If you set “Alarm” of a schedule event/ToDo item to “OFF”, the icon is not displayed.
Function Menu while Alarm is Displayed
Edit Go to step 1 of “Using Alarm” on page 400.
Detail You can display the stored alarm contents.
Set this You can validate the stored alarm.
YES
p You can validate also by pressing
O o
( ).
Set all You can validate all the stored alarm.
YES
Delete
Delete this YES
Delete all Enter you Terminal Security Code YES
Information
p
If the alarm tone sounds during a call, press any key to stop it. Once again press any
key to end the alarm including Snooze. If the other party on the phone hangs up, an
alarm including Snooze ends.
p During a call, the alarm tone sounds at the level set for “Volume” (earpiece volume).
p
Turn off the FOMA terminal after setting “Auto power ON” to “OFF” when you are near
electronic devices using high-precision control or weak signals, or where the use is
prohibited such as in airplanes and hospitals.
When you set an alarm for “Alarm”, “Schedule”, and “ToDo”
Note: The page above is a sample.
Menu number
(See page 36) Function name
You can find this in
Index.
Operating
procedure
(See page 34)
Reference display
(Characters and settings
are for reference.)
Options and their
explanations
Items shown on the
display
(Some items cannot
be executed.)
Operation and
supplementary
explanation for each
item
Operations related to
the function and
explanations for
supplementary
operations
Chapter title
You can
search by
chapter.
Cautions or
references for using
each function
Lower sub-menu item
of the Function menu