Docomo P-07A Prime Series, Instruction Manual

Page: 246 / 617

244
Camera
<Shoot with frame>
≥
When “Image size” is set to “2M (1200 x 1600)” or larger, you cannot shoot with a
frame.
≥
If you shoot a still image with a frame using the inside camera and save it, the frame is
also horizontally reversed when the still image is automatically reversed as a correct
image.
≥
You cannot save the still image shot with a frame as the mirrored image.
<Flicker correction>
≥
If you set to “Auto”, it may take a while to automatically adjust the flicker. In this case,
switch to Mode 1 or Mode 2 according to the power frequency provided in the
shooting location.
<Storage setting>
≥
See “Select storage” for how to set a storage location on the microSD card.
≥
If you change “File size setting” to “Long time”, “Store in” is set to “microSD” and
“Storage setting” cannot be operated.
≥
When “Auto save set” is set to “ON”, the image is saved to the latest folder if “Select
storage” is not set or the folder set as a destination folder is deleted.
<High sensitiv.>
≥
When “ON” is set, you cannot set “Image size” to “2M Wide (1080 x 1920)” or larger.
≥
When you set “High sensitiv.” to “ON” while “Image size” is set to “2M Wide (1080 x
1920)” or larger, “Image size” is changed to “2M (1200 x 1600)”. If you switch “High
sensitiv.” to “OFF” without changing “Image size” and without ending the camera, it
returns to the image size before you set “High sensitiv.” to “ON”.
<Continuous mode>
≥
You cannot set to “Auto bracket” for the inside camera. When you switch to the inside
camera while “Auto bracket” is set, “Auto” is set.
<Shot number>
≥
The number of shots that can be set differs depending on the image size. The number
of shots that can be set is as follows:
VGA (480 x 640): 4
QVGA (240 x 320): 5 through 10
QCIF (144 x 176): 5 through 20
Sub-QCIF (96 x 128): 5 through 20
Information
You can set the file restrictions for when you save a still image/moving
picture you shoot. The recipient of the file (primary distribution) cannot
attach the received file to i-mode mail.
1
Finder display
1
i
( )
1
Storage setting
1
File restriction
or
Post View display in Photo Mode, Movie Mode or
Continuous Mode/Detailed display in Continuous Mode
1
i
( )
1
File restriction
2
File unrestricted or File restricted
≥
From the Post View display in Continuous Mode, you can change the file
restriction settings for the image you put a check mark on.
<Display size>
≥
When “Image size” is set to “HVGA Wide (640 x 352)” or larger, “Fit in display” always
applies.
≥
When “Image size” is set to “QCIF (144 x 176)” or “Sub-QCIF (96 x 128)”, the image is
enlarged two times at both lengthwise and sidewise when it is displayed in “Actual
size”.
≥
The setting for the Finder display is reflected in the Post View display; however the
setting for the Post View display is not reflected in the Finder display.
<Common replay mode>
≥
You cannot operate when you set “File size setting” to “Long time”.
File Restriction
Information
Information
≥
Even when you set “File restriction” to “File restricted”, the still images/moving pictures
can be output from the destination mobile phone by transmitting the images using
infrared communication or by copying them to the microSD card.
≥
After saving, you can use “File restriction” on page 342 to change the settings.
≥
When you set “File size setting” to “Long time” in Movie Mode, “File restriction”
becomes “File unrestricted”.