Docomo P-07A Prime Series, Instruction Manual

Page: 134 / 617

132
S
e
cu
rity S
e
ttin
g
s
To use Face Reader, store 3 or more face data files. You can store up to
10 face data files.
1
m
1
Set./Service
1
Lock/Security
1
Lock setting
1
Face reader setting
1
Enter your Terminal
Security Code
1
Store
1
OK
Face to the front, and locate the face
within the guide frame. You can
prevent the failure in authenticating
the face data file, which results from
the difference in the position of the
face at storing and authenticating the data.
When your face is recognized, the recognition frame for the eyes and mouth is
displayed and the guide frame becomes green. When the recognition frame is not
displayed or it comes off your eyes and mouth, place your face off the frame; then
change the facing direction of your face to correctly display the recognition frame.
≥
The number of face data files is displayed by the bar on the Face Data Reading
display.
2
Press
O o
( ).
The face data file is shot.
3
Press
O o
( ).
The face data file you have shot is stored. Repeat step 2 through step 3 to store
three or more face data files.
≥
When the third face data file is stored, the message appears telling that Face
Reader can be more easily used by adding face data file.
≥
When you press
r
, the confirmation display appears asking whether to delete
the face data file.
≥
If you try to store the face data file in the same environment, you might not be
able to store it. Change the direction of the face or the place for shooting.
Store
Face Data Reading
display
Stored number bar
Guide frame
Recognition frame
You can reset all the face data files stored in Face Reader.
1
m
1
Set./Service
1
Lock/Security
1
Lock setting
1
Face reader setting
1
Enter your Terminal Security Code
1
Delete stored images
1
YES
Information
≥
At shooting, the Call/Charging indicator flickers and the shutter tone sounds
regardless of the Manner Mode setting. The sound volume for shutter tone cannot be
changed.
Function Menu of the Face Data Reading Display
Brightness You can adjust to -3 (dark) t3 (bright).
1
Select a brightness level.
≥
You can adjust brightness also by pressing
3
from the Face
Data Reading display.
Help You can check the cautions for shooting.
≥
You can show Help also by pressing
0
from the Face Data
Reading display.
Delete Stored Images
At Face reader
start-up
± 0
Information
≥
You cannot reset the face data files during Personal Data Lock or IC Card Lock.
≥
When you reset the face data files, “PIM/IC security mode” is set to “Security code”.