Docomo P-07A Prime Series, Instruction Manual

Page: 267 / 617

265
1Seg
≥
When the timer alarm is set to the same time of “Alarm”, “ToDo”, or “Schedule”
The alarm sounds in the priority order of “Alarm”
→ “Timer recording” → “ToDo”
→
“Schedule”
→
“TV timer”.
≥
When the power is turned off
The timer alarm does not sound except for the TV Timer setting with “Auto power ON”
set. For Timer Recording, you cannot record a 1Seg program unless the power is
turned on one minute before the start date/time.
The icon does not appear on the desktop even after turning on the power.
≥
In Manner Mode
The vibrator, message display, and illumination light notify you. The alarm sounds at
the volume set for Manner Mode. (See page 109)
≥
During Lock All, Personal Data Lock or Omakase Lock
The timer alarm does not sound. You cannot record a 1Seg program unless each lock
is released one minute before the start date/time.
However, when “TV timer” is set to “Accept” or “Timer recording” is set to “Accept” for
“Customize” of Personal Data Lock, the alarm sounds or the recording starts even
during Personal Data Lock. For TV Timer, you need to manually activate 1Seg even if
“Act. TV w/alarm” is set to “Auto ON”.
≥
While the microSD card is operated, during infrared communication or iC
communication, or while updating software program
The timer alarm does not sound. You cannot record a 1Seg program unless each
function is finished one minute before the start date/time.
Information
≥
When you set “Alarm setting” to “Alarm preferred” for the setting of TV Timer/Timer
Recording and the alarm time comes while you are dialing, the alarm sounds after you
call up the other party. When the alarm time comes while ringing, the alarm sounds
after you start talking.
≥
When you have set “PIN1 code entry set” to “ON” and set “Auto power ON” to
automatically turn on the power to sound TV timer alarm, the display for entering your
PIN1 code appears after the power is automatically turned on. The timer alarm does
not sound unless you enter your PIN1 code.
≥
When you set “Auto power ON” to automatically turn on the power to sound a TV
timer alarm, the alarm sounds after the wake-up image stops.
≥
You might not be able to set some i-motion files/Chaku-uta Full
®
music files for TV
timer alarm.
The alarm tone stops by pressing any of the keys, but the animation/i-motion becomes a
still image, and the timer alarm message stays displayed. When “Act. TV w/ alarm” is set
to “OFF”, press any key again to clear it. However, you cannot clear the timer alarm
message by pressing a side key, with the FOMA terminal closed. When a call comes in,
the alarm stops.
Press
O o
( ) and select “YES” from the Timer Alarm Notification display; then
1Seg starts, and you can watch the program set for TV Timer. In the case that a program
is being recorded, the video recorded up to that point is saved.
The icon may appear on the desktop. You can check that icon for the contents of the
missed timer alarm (setting information) or recording result.
The setting information or recording result is the latest missed one.
≥
When “Act. TV w/ alarm” is set to other than “OFF”, you can start 1Seg also by
pressing
O o
( ) and select “YES” from the display of setting Information.
≥
When recorded video is stored, you can play back the video also by pressing
O o
( ) from the display of recording result.
≥
Depending on the i-motion file you set for TV timer alarm, only the audio might be
output at the specified time.
≥
When a Chaku-uta Full
®
music file is set for TV timer alarm, only the audio is output at
the specified time. The illumination for when you play back a demo to select an alarm
tone differs from for when you are notified by an alarm.
≥
While Timer Recording is being performed during Personal Data Lock, the information
in the broadcasting storage area cannot be read out. Also, the functions such as
i-mode mail composition or Phonebook storage cannot be automatically used from
the data broadcasting or data broadcasting site. When 1Seg tries to use these
functions, a message appears telling that the function cannot be executed due to
Personal Data Lock.
To stop alarm tone/clear alarm message, animation, and
i-motion of TV timer alarm
When “Act. TV w/ alarm” of TV Timer is set to “Manual ON”
When “Timer Alarm Notification” is not executed or recording
is completed
Information