Docomo P-07A Prime Series, Instruction Manual

Page: 369 / 617

367
Da
ta
Ma
n
a
ge
m
e
nt
■
Inserting
1
To open the cover of the
microSD card slot, pull it out in
the direction A and then turn it
in the direction B.
2
With the metal terminal surface
facing downward, make sure
that the cut edge is positioned
at right and then insert.
≥
Push it until it clicks.
3
Close the cover of the microSD card slot.
≥
Note that formatting deletes all the contents on the microSD card.
≥
If you read/write data from/on a microSD card using a device other than this FOMA
terminal, the microSD card might become unusable depending on the device or
operations.
≥
When you insert a microSD card which has been used with another device such as a
personal computer into P-07A, new files and folders to be used in P-07A are created.
Inserting/Removing microSD Card
Information
■ Removing
1
Open the cover following step 1
of “
■ Inserting” and push the
microSD card until it stops.
≥
By pushing all the way in, the microSD card
pops out.
2
Remove the microSD card.
■ Icons on the display
The following icons appear when you insert the microSD card:
: You can save and read data.
: The microSD card is write-protected. You cannot save data, and execute “Check
microSD” and “microSD format”.
: You cannot use the microSD card. Remove the microSD card and then insert it
again.
If “
” is still displayed, execute “Check microSD” or “microSD format”.
Information
≥
Do not insert or remove the microSD card with the FOMA terminal turned on. It may
damage the microSD card or its data.
≥
Note that microSD card may pop out when you insert or remove it.
≥
Check the direction of the microSD card, and then insert or remove it straight. If you
obliquely insert the microSD card into the slot, the microSD card may be damaged.
≥
It may take long to initially read or write data after inserting the microSD card.