Docomo P-07A Prime Series, Instruction Manual

Page: 587 / 617

22
5
Select a connection method.
<When you can select the COM port number of “FOMA P07A”>
Select the COM port number with which you install the “FOMA
P07A” in the “
接続方法 (Connection method)” field, then click
“OK”.
Then, go to step 6.
≥
Here, “COM3” is selected as an example. See page 19 for
the COM port number of “FOMA P07A” you should actually
select in the “
接続方法
(Connection method)” field.
<When you cannot select the COM port number of “FOMA P07A”>
Click “ キャンセル (Cancel)” to close the “ 接続の設定 (Set a
connection)” display, then perform the following operations:
(1)“
ファイル (File)” menu → Select “ プロパティ (Properties)”.
(2) Select “FOMA P07A” in the “ 接続方法 (Connection
method)” field of the “
接続の設定
(Set a connection)” tab
on the “Sample
のプロパティ
(Sample properties)” display.
(3) Uncheck “ 国/地域番号と市外局番を使う (Use country/
region code and city code)”.
(4) Click “OK”.
Then, go to step 7.
6
The properties of the COM port number appear on the display, then click
“OK”.
≥
This display appears when you select a COM port number in step 5.
7
Set an access point name (APN).
Enter an access point name (APN) in the following format:
AT+CGDCONT = cid, "PDP_type", "APN"
cid: Enter 2 or any number from 4 through 10.
※
If you have already specified cid, be careful that its contents are overwritten by the access point name you enter here.
"PDP_type": Enter "PPP" or "IP".
"APN": Enclose an access point name (APN) in double quotation marks (").
(Example:When specifying APN “XXX.abc” in cid2)
AT+CGDCONT=2,"PPP","XXX.abc"
Enter this character string, then press . If “OK” appears,
the APN setting is completed.
≥
To confirm the current APN setting, enter “AT+CGDCONT?
”. The set APNs are listed on the display.
Continued to Next Page