Docomo P-07A Prime Series, Instruction Manual

Page: 308 / 617

306
i-
α
p
p
li/
i-W
id
ge
t
“ FOMA 通信環境確認アプリ (FOMA Communication
Environment Check Application)” enables you to check
whether the FOMA terminal is available at the FOMA
High-Speed Area.
≥
Use “ FOMA 通信環境確認アプリ (FOMA Communication
Environment Check Application)” with your consent to “
ご利
用の注意 (Cautions in use)”.
≥
Depending on the communication environment (such as
weather, radio wave conditions, network congestion state) at
communication environment check, the different result or “out
of service” might appear even in the same area or at the
same period of time.
≥
You might not be able to check correctly if you use another function while using this
application program.
1
m
1
i-
α
ppli
1
i α
ppli settings
1
Do the following operations.
FOMA 通信環境確認アプリ
(FOMA Communication Environment Check Application)
<
i α
ppli Settings>
Setting i-
α
ppli
※ The display is for reference.
The actual one may differ.
Auto start setting See page 307.
Disp. software info See page 291.
i-Widget roaming set. See page 312.
i-Widget sound effect See page 312.
i α
ppli call settings
i α
ppli call DL set. See page 309.
i α
ppli call sound See page 309.
Preferred tone You can set which sound to be output preferentially, from
MUSIC/1Seg or i-
α
ppli program, for when you start an i-
α
ppli
program during music playback or use of 1Seg.
1
MUSIC/1Seg or
i α
ppli
α
Backlight You can set the backlight operation for when an i-
α
ppli
program is running.
1
Select an item.
Depend on system . . . . .Follows the setting of “Backlight”.
Depend on software . . . .Follows the setting of each
software program.
Constant light . . . . . . . . .Lights constantly.
α
Power saver You can set to Power Saver Mode to decrease battery
consumption by temporarily suspending the i-
α
ppli program
for when you close the FOMA terminal while i-
α
ppli is running.
1
ON or OFF
≥
This setting is valid from when you start an i-
α
ppli program to
when you exit it.
≥
Even when this function is set to “ON”, Power Saver Mode
becomes invalid if “Power saver” that can be set for each
i-
α
ppli program is set to “OFF”.
α
Vibrator You can set the vibrator operation for when an i-
α
ppli program
is running.
1
Depend on system or Depend on software
Depend on system . . . . .Does not work regardless of the
setting of “Vibrator”. With some
software programs, the vibrator
works.
Depend on software . . . .Follows the setting of each
software program.
Check settings You can check each of “
i α
ppli settings”.
Information
<
α
Backlight> <
α
Vibrator>
≥
With some software programs, the backlight and vibrator settings are “OFF”.
Consequently, if you set “Depend on software”, the backlight and vibrator will not
work; if you want them to work, set “Depend on system”.