Docomo P-07A Prime Series, Instruction Manual

Page: 427 / 617

425
Co
nv
e
n
ie
nt Fu
nc
ti
on
s
2
Play back an i-motion file, movie file, video or music.
The sound is output from the Bluetooth device.
≥
When the confirmation display appears asking whether to start output to the
Bluetooth device, select “YES”.
≥
Once you connect the FOMA terminal to the Bluetooth device using Audio
service, a connection history is stored. When the connection history is found, the
FOMA terminal automatically tries to connect to the Bluetooth device for playing
back a file even if you do not connect using Audio service. When a connection is
successfully completed, the sound is output from the Bluetooth device. When the
connection fails, the confirmation display appears asking whether to output the
sound from the FOMA terminal. However, it cannot automatically connect for
playing back an i-motion file.
The connection history is overwritten each time the Bluetooth device is connected
using Audio service.
≥
For operations from the Bluetooth device, refer to the instruction manual for the
Bluetooth device you use.
Information
≥
You can output the audio of video file only on an A2DP compatible Bluetooth device
that supports copyrighting by the SCMS-T.
≥
While playing back the sound of an i-motion file, movie file, video, or music from a
Bluetooth device, you cannot change the sound volume by adjusting from the FOMA
terminal.
≥
Even when you are using Play Background for MUSIC Player or Music&Video
Channel, the remote-control operation for Bluetooth device is available.
≥
You cannot output the audio from the Bluetooth device when an earphone/
microphone (option) is connected.
≥
If the sound of an i-motion file, movie file, video, or music stops while it is played back
from the Bluetooth device, check your FOMA terminal as the possible causes are as
follows:
･ When the Bluetooth device is disconnected
･ When a location provision request of GPS comes in
･ When a mail message or Message R/F comes in
･
When a PushTalk call comes in
･ When the low battery alarm sounds
･ When an alarm for “Alarm”, “Schedule”, “ToDo”, “TV timer” or “Timer recording”
sounds
In these cases, the Audio service might be disconnected depending on the Bluetooth
device. To resume playback on the Bluetooth device, you need to re-connect the
Audio service.
1
m
1
LifeKit
1
Bluetooth
1
Bluetooth settings
1
Do the following operations.
≥
You cannot operate during a call or data communication.
≥
When you activate MUSIC Player with a Bluetooth device connected and the
Bluetooth device is disconnected from the FOMA terminal which is closed, MUSIC
Player ends. However, it does not end when “MUSIC Player autostart” is set to “OFF”.
Bluetooth Settings
Information
Set authentications You can set whether to set authentication when sending a
Phonebook entry via a Bluetooth device. If you set to “ON”, set
whether to encrypt the data.
1
ON or OFF
1
ON or OFF
Session number
setting You can set whether to enter the password for sending all
Phonebook entries.
1
ON or OFF
Time-out to search You can set the time for searching for Bluetooth communication
compatible devices around the FOMA terminal.
1
Enter a device search time (seconds).
≥
Enter two-digit numerals as in “05” through “20”.
Forward ring tone You can set whether to send a ring tone for the voice call and
videophone call to the connected Headset or Hands-free device.
When the device is specified as “Preferred device”, connection is
made to send the ring tone even if the device is on standby.
1
ON or OFF
Disconnection
settings You can select whether to end talking or continue talking on the
FOMA terminal when Bluetooth communication is disconnected
while talking through the Headset or Hands-free device.
1
End the call or Continue on the phone