Docomo P-07A Prime Series, Instruction Manual

Page: 84 / 617

82
Vo
ice
/V
id
e
o
pho
ne
Cal
ls
/P
u
sh
Ta
lk
You can use the PushTalk Phonebook or Redial/Dialed Calls/Received Calls to
communicate with multiple members.
While making or receiving a PushTalk group call, the group name and the members in
the group are displayed. Press
N o
to confirm other members. When a call is received
with the other party’s phone number not provided, “User unset” is displayed.
Use Redial/Dialed Calls/Received Calls to make a PushTalk call while the PushTalk
communication continues among other members.
≥
If the PushTalk communication has already been finished, your call is dialed as a new
PushTalk call.
≥
Whether to notify others of your phone number when you make PushTalk calls follows
the setting for “Activate/Deactivate” of “Caller ID notification” (see page 48). However,
when you set “Notify caller ID” from the Function menu for dialing, or when “Notify”/
“Not notify” is displayed in the detailed Redial/Dialed Call/Received Call display, each
of those settings will work.
≥
When you make a PushTalk call with your phone number notified, your phone
number as well as all members’ phone numbers are notified to all members including
added members. When you make a PushTalk call without notifying your phone
number, “User unset” appears in the caller’s and member’s fields on the displays of all
the members including added members. Your phone number is very important
information, so take the utmost care to notify others of it.
≥
If you make a PushTalk call during i-mode communication, the i-mode communication
is disconnected.
≥
You cannot use PushTalk by Number B of 2in1.
Making/Receiving a PushTalk group call
Re-participating or participating midway in PushTalk
communication
Information
■ Display while dialing/communicating
1 The phone number of the member who has the talker’s
right is displayed, and the state of the talker’s right is
displayed in color of the round icon at the upper left.
When the name of that member, phone number, and
image are stored in the Phonebook, his/her name and
image are displayed. However, when you cannot receive
a member’s information correctly, “?” is displayed.
1
2
3
During group
communication
Color of the
round icon at the
upper left
State of the talker’s rights
Blue Calling
Green You can get the talker’s right.
Blinking in green You have the talker’s right.
Blinking in yellow Another member has the talker’s right.
Blinking in green
and red
The talker’s right will be released automatically in a few seconds
because it has long been retained (A release notice tone
sounds).