Docomo P-07A Prime Series, Instruction Manual

Page: 586 / 617

21
4
Open the “
モデム
(Modem)” tab,
confirm the COM port number in
the “
接続先
(Access point)” field of
“FOMA P07A”, then click “OK”.
≥
When connecting wirelessly using Bluetooth communication,
confirm the COM port number of the in-use Bluetooth linked
standard modem or Bluetooth modem provided by a
Bluetooth device maker in the “
接続先 (Access point)” field.
≥
The COM port number you confirmed is used to set an
access point name (APN) (see page 21).
≥
The contents on the property display and COM port number
vary depending on the personal computer you use.
This section explains how to set an access point name (APN) for packet communication. You can register
up to 10 access point names (APNs), which are managed with cid1 to cid10 (see page 23).
When using “mopera U” or “mopera”, you do not need to set the access point name (APN).
The explained here is an example when you use “XXX.abc” as the access point name (APN) and use the
FOMA USB Cable with Charge Function 01/02 (option). For the actual access point name (APN), contact
your Internet service provider or network administrator.
The setting here will be the access point number for dial-up network setting (see page 25).
1
Connect the FOMA USB Cable with Charge Function 01/02 to the FOMA
terminal.
2
Turn on the power to the FOMA terminal, then connect the FOMA USB
Cable with Charge Function 01/02, which is already connected to the
FOMA terminal, to the personal computer.
3
Start Hyper Terminal.
“ スタート (Start)” → “ すべてのプログラム (All programs)” → “ アクセサリ (Accessories)” → “ 通信 (Communications)” → Open “ ハイ
パーターミナル
(Hyper Terminal)”.
After starting Hyper Terminal, when the message “ 『既定の Telnet 』プログラムにしますか? (Select the specified Telnet
program?)” is displayed, set as desired. Contact the maker of your personal computer and Microsoft Corporation for the setting
contents.
≥
For Windows 2000, “
スタート
(Start)”
→
“
プログラム
(Programs)”
→
“
アクセサリ
(Accessories)”
→
“
通信
(Communications)”
→
Open “ ハイパーターミナル (Hyper Terminal)”.
4
Enter any name in the “ 名前
(Name)” field, then click “OK”.
Here, “Sample” is entered as an example.
Set an Access Point Name (APN)
For Windows XP
Continued to Next Page