Docomo P-07A Prime Series, Instruction Manual

Page: 416 / 617

414
Co
nv
eni
e
n
t Fu
nc
ti
on
s
You can set the call cost limit for Total Calls and can be notified when it is
exceeded. If you set “Auto reset setting” to “ON”, the call cost is reset at
midnight on the 1st of the month and “
” is deleted.
1
m
1
Set./Service
1
Call time/cost
1
Notice call cost
1
Enter your Terminal Security Code
1
ON or OFF
1
Enter a max cost.
≥
You can set from ¥10 through ¥100,000 in unit of ¥10.
2
Select a method to alert
1
ON or OFF
1
Enter the PIN2 code.
≥
See page 124 for PIN2 code.
“ ” appears. When “Icon + alarm” is set as a notice method and the Stand-by display
returns, the message to the effect that the call cost has exceeded the maximum cost is
displayed, and a warning tone sounds from the speakers.
You can clear “ ” displayed by Notice Call Cost.
1
m
1
Set./Service
1
Call time/cost
1
CLR max cost icon
1
Enter your Terminal Security Code.
<Notice Call Cost>
Setting Call Cost Limit
When Total Calls has exceeded the max cost
Clear Max Cost Icon
Information
≥
“ ” is cleared also by executing Reset Total Cost, Reset Settings, or Initialize.
≥
To be re-notified of the set limit after the maximum cost is exceeded, reset Total Calls.
You can display the calculator to make the four rules of calculation
(
＋
,
−
,
×
,
÷
). You can display up to 10 digits.
1
m
1
Stationery
1
Calculator
1
Follow the operation below to make a
calculation.
You can store up to 20 text memos.
1
m
1
Stationery
1
Text memo
1
Select <Not recorded>
1
Enter a text memo.
≥
You can enter up to 256 full-pitch/512 half-pitch characters.
≥
You can check the stored contents by selecting a stored text memo, and you can
edit it by pressing
O o
( ).
+ m - 8 - 5
<Calculator>
Using Calculator
* V o
＋
* Z o
×
* C o
−
* X o
÷
* O o
＝
+ l
Decimal point
+ i
%
- r
C (Clear): Clears the numeral you have
entered last.
AC (All clear): Clears all the calculations
you entered.
Information
≥
You cannot enter a minus sign while you are performing calculation.
≥
When the calculated result exceeds 10 digits or invalid calculation like “divided by 0” is
performed, “.E” is displayed.
+ m - 4 - 2
<Text Memo>
Making Text Memos