Docomo P-07A Prime Series, Instruction Manual

Page: 94 / 617

92
Ph
on
ebo
o
k
Address
1
Enter a ZIP code
1
Enter a postal address.
≥
You can enter up to 7 digits for the zip code.
≥
You can enter up to 50 full-pitch/100 half-pitch characters for the
postal address. Further, you can enter pictograms as well.
≥
You cannot enter “ 〒 ” or “-” (hyphen) in the zip code.
Location
information
1
Select an item.
By position loc.
. . .Measures the current location (see page 328) and store the
location information. After checking the location information,
press
O o
( ).
From loc. history
. . .Select a piece of location information from Location History
(see page 332) and store it.
Attach from image
. . .Stores the location information from an image. Select a
folder, then the image.
From own number
. . .Stores the location information from “Own number”. Enter
your Terminal Security Code and press
O o
( ).
≥
To delete the stored location information, select “Delete location
info”.
Birthday
1
Enter a birthday.
≥
You can enter the birthday from January 1, 1800 through
December 31, 2099.
≥
You can check the birthday from Schedule. (See page 404)
Memo
1
Enter a memo.
≥
You can enter up to 100 full-pitch/200 half-pitch characters.
Further, you can enter pictograms as well.
Image The stored still image is displayed when you call up the
Phonebook entry.
1
Select an item.
Select image . . . You can store a still image in Data Box.
Shoot image . . . You can store the shot still image.
Perform step 2 through step 3 on page 234.
≥
To release the stored still image, select “Release image”.
≥
The size of a still image you can store is Stand-by (480 x 854) or
smaller and up to 300 Kbytes in JPEG format or GIF format.
≥
If you store a still image larger than 72 x 54 dots, it is displayed
shrunk on the detailed Phonebook display.
≥
If you store a still image larger than 240 x 180 dots, it is
displayed shrunk on the Call Receiving display.
≥
When “Disp. PH-book image” is set to “ON”, the stored still
image is displayed for an incoming call. However, when another
image is stored for “Picture”, that image is preferentially
displayed for the incoming call.
Memory No.
1
Enter a memory number.
≥
Enter a three-digit number of “000” through “999”.
≥
The lowest empty memory number “010” through “999” is
entered in advance.
If “010” through “999” are all occupied, the lowest empty
memory number from “000” through “009” is entered.
Ring tone You can set a ring tone for when a voice call or videophone call
comes in from the person stored in the Phonebook.
1
Select ring tone
Go to step 2 on page 104.
≥
To release the stored ring tone, select “Release ring tone”.
Vibrator You can set a vibration pattern for when a voice call or
videophone call comes in from the person stored in the
Phonebook.
1
Select vibrator
1
Select a vibration pattern.
≥
To release the stored vibrator, select “Release vibrator”.