Docomo P-07A Prime Series, Instruction Manual

Page: 186 / 617

184
Mail
1
l
1
Area Mail settings
1
Do the following operations.
<Early Warning “Area Mail” Settings>
Setting Early Warning “Area Mail”
Receive setting You can set whether to use Area Mail.
1
Yes or No
Beep time You can set the duration the beep sounds.
1
Enter a beep time (seconds).
≥
Enter it in two digit, from “01” through “30”.
Manner/Public mode
set You can set an operation for when an Area Mail message is
received in Manner Mode or Public mode (Drive mode).
1
Select an item.
Ring. . . . The buzzer or ring tone sounds, and the vibrator
works regardless of the setting of Manner Mode or
Public mode (Drive mode).
Follow each mode set.
. . . . . . . . Follows the setting of Manner Mode or Public mode
(Drive mode).
Check ring tone You can check how the buzzer, ring tone, vibrator, and Call/
Charging indicator work for when “Quake Early Warning” or
“Disaster/Evacuation” is received.
1
Quake Early Warning or Disaster/Evacuation
Other menu
Receive entry You can register Message IDs for receiving information other
than Quake Early Warning and Disaster/Evacuation. You can
register up to 20 IDs.
≥
You do not need to operate “Receive entry” for receiving
only Quake Early Warning and Disaster/Evacuation.
1
<New>
1
Enter your Terminal Security Code
1
Enter a registration name
1
Enter a Message ID.
≥
To edit a registered Message ID, highlight it, press
l
( ), and then enter your Terminal Security Code.
≥
You can enter up to 15 full-pitch/30 half-pitch characters for
an arbitrary registration name. For a Message ID, enter 4
half-pitch characters specified by the service provider.
≥
You can edit it also by selecting “Edit” from the Function
menu. Select “Delete this” or “Delete all” and enter your
Terminal Security Code. Then you can delete one or all
Message IDs.
≥
You cannot edit/delete “Quake Early Warning” and
“Disaster/Evacuation”.
Information
<Receive entry>
≥
The buzzer does not sound when you receive a quake early warning when “Follow
each mode set.” is set with the manner setting by “Manner mode” or “Super silent”.
However, the buzzer sounds with “Original” set to sound any of the following tones.
When every setting is set to mute, the buzzer does not sound:
・ Phone volume ・ Mail volume ・ Alarm volume
・
Memo tone
・
Keypad sound
≥
Even when “Follow each mode set.” is set and “Vibrator” of “Original” is set to “OFF”,
the vibrator works if you receive a quake early warning.