Docomo P-07A Prime Series, Instruction Manual

Page: 257 / 617

255
1Seg
≥
When you close the FOMA terminal while you are watching 1Seg programs, a
dedicated still image appears in the Private window, but images or data broadcasting
programs do not appear. When “TV sound while closed” is set to “ON”, audio sounds
even if the FOMA terminal is closed, however, you cannot do any operations other
than volume adjustment.
≥
The following might occur depending on the airwave conditions:
・
The audio is interrupted.
・
The data broadcasting is not operable.
・ Block-shaped noise appears on the display or playing stops.
・ The video or the data broadcasting is not displayed. (A dark screen appears.)
≥
The caption might not be displayed depending on the program.
≥
The data broadcasting cannot be displayed on the horizontal display.
≥
If you move, the receivable airwaves or broadcasting stations might change being
affected by mountains or buildings. If reception on 1Seg goes bad after moving,
perform “Auto channel setting”; then reception might be improved via different
airwaves or you might be able to watch programs of other broadcasting stations.
≥
If you use Channel Search to select channels after you move, etc., you might find the
channels you could not store by “Auto channel setting”. Execute “Add to ch. list” to
store the channels you found, and then you can watch the channel from the next time.
≥
When starting 1Seg or switching channels, it takes a while before you can watch a
1Seg program.
Function Menu of Viewer Display
Information
Program info You can display information of the program you are
watching.
Program guide See page 258.
Disp.Ch. /operation
Channel info You can display the detailed display of the selected
channel list. Select a broadcasting station to switch to it.
Channel list Go to step 1 of “Select Channel List” on page 252.
Channel setting See page 251.
Add to ch. list You can add the broadcasting station you are currently
watching to the channel list.
1
YES
≥
The broadcasting station is stored in the lowest
number of an unoccupied remote-control number
from 13 onward.
Tune service You can select a program to watch when the same
broadcasting station is broadcasting multiple services
(programs).
1
Select a channel.
Data broadcasting
Back to data BC You can stop browsing the data broadcasting site and
return to the data broadcasting.
Reload contents You can reload the data broadcasting site being
displayed.
≥
The confirmation display appears asking whether to
re-send the data you entered, depending on the site.
Certificate See page 202.
Image display set. See page 213.
Sound setting See page 267.
ToruCa from dataBC See page 325.
Reset settings See page 267.
TVlink list You can display the TVlink list. (See page 259)
Compose message See page 257.
Settings
Display/operation