Docomo P-07A Prime Series, Instruction Manual

Page: 132 / 617

130
S
e
cu
rity S
e
ttin
g
s
You can set “Timer lock ON at close” that automatically activates
Personal Data Lock or IC Card Lock when the specified time elapses after
closing your FOMA terminal.
1
m
1
Set./Service
1
Lock/Security
1
Lock setting
1
Timer lock ON at close
1
Enter your Terminal Security Code
1
Personal data lock or IC card lock
1
Select an elapse time.
If you set to other than “OFF”, “ ” appears and then Timer Lock ON At Close is
set. The display asking whether to activate “Lock OFF at open” also appears.
Information
<Mail receiving>
≥
When “Not accept” is set, you can automatically receive Messages R/F, i-mode mail
messages, chat mail messages, and SMS messages during Personal Data Lock;
however, the Receiving or Reception Result display does not appear. Further, the
receiving operation such as ringing/vibration does not work, so you are not notified of
receiving. The icons such as “
”, “ ”, or “ ” appear after Personal Data Lock is
released.
≥
When “Not accept” is set, you cannot check a missed call or new mail during Personal
Data Lock, by pressing
. >
with the FOMA terminal closed.
<Display setting>
≥
Whether to validate/invalidate the setting contents for “Stand-by display” and
“Stand-by disp. Wide” of “2in1 setting” is also set.
<Lock Setting>
Setting a Variety of Locks
Timer Lock ON At Close
You can set to show the display for releasing each lock for when you
open the FOMA terminal after Personal Data Lock or IC Card Lock is set
by “Timer lock ON at close”.
1
m
1
Set./Service
1
Lock/Security
1
Lock setting
1
Lock OFF at open
1
Enter your Terminal Security Code
1
Personal data lock or IC card lock
1
ON or OFF
Information
≥
When the Stand-by display is not shown, or when another function is working with the
Stand-by display shown, the lock is not activated even after the specified time
elapses. However, when another function ends after closing the FOMA terminal, the
lock is activated after the specified time elapses.
≥
When “Reject unknown” is set, Personal Data Lock is not activated even after the
specified time elapses.
≥
When a call or mail message comes in after closing the FOMA terminal, or when you
open it, the elapsed time counter returns to 0 seconds.
≥
When this function is activated, the lock is temporarily released if you release each
lock. However, it is re-locked when the specified time elapses after closing the FOMA
terminal.
≥
If you set “Key lock” during Timer Lock ON At Close, “ ” is cleared and “ ”
appears instead.
Lock OFF at open
Information
≥
When you open the FOMA terminal in Horizontal Open Style while “Work with style” is
set to other than “OFF”, the Lock Release display does not appear.