Docomo P-07A Prime Series, Instruction Manual

Page: 512 / 617

510
Ap
pe
nd
ix/
Tro
ub
le
sho
ot
ing
The ring tone does not
sound.
≥
Make sure Ring Volume is not set to “Silent”.
≥
Make sure Public mode, Manner Mode, and Self
Mode are deactivated.
≥
Make sure Call Rejection, Call Acceptance, Call
Setting without ID, Ring Time, and Reject Unknown
are deactivated.
≥
Make sure the ring time for Voice Mail Service, Call
Forwarding Service, Record Message Setting, and
Auto Answer Setting are not set to 0 seconds.
68
70
108
128
137
138
139
71
418
439
442
Cannot talk.
(Example: “
” does
not disappear even if you
move to another place.
You cannot make or
receive a call, though the
radio wave conditions
are not bad.)
≥
Turn off and on the FOMA terminal, or remove and
attach/insert the battery pack or UIM.
≥
Depending on the radio wave property, you may not
be able to make or receive a call even if the FOMA
terminal is “within service area” or “
” is
displayed as the radio wave condition. Move to
another place and redial.
≥
Make sure the call restrictions such as Call
Rejection, Call Acceptance, etc. are deactivated.
≥
Depending on the radio wave congestion state,
calls and mail messages may be congested and
hard to be connected in crowded places. In this
case, the message “Please wait” or “Please wait for
a while” is displayed and a busy tone sounds. Move
to another place or wait for a while, and then redial.
39
41
45
—
137
—
The display is dark.
≥
You might have changed the brightness of
Backlight. When “Auto setting” is set, the backlight
is adjusted according to the ambient brightness.
≥
Make sure Power Saver Mode is deactivated.
≥
Make sure ECO Mode of 1Seg is deactivated.
≥
Make sure View Blind is not set to “ON”.
115
114
267
116
The other party’s voice is
difficult to hear or too
loud during a call.
≥
You might have changed the earpiece volume.
≥
If you change the setting of Shikkari Talk or Yuttari
Talk, the other party’s voice will be more audible.
68
63
Images or melodies
selected in the functions
are not played back; they
are played back by the
default setting.
≥
Make sure you have inserted the UIM that was
inserted at the time of obtaining images or
melodies. 39
Problem Countermeasures Reference
Mail messages are not
received automatically.
≥
Make sure Receive Option Setting of Mail Settings
is not set to “ON”. 159
Cannot access i-mode,
i-mode mail, i-
α
ppli, and
i-Channel.
≥
Make sure Access Point Setting is set to “i-mode”.
≥
If you have started using the FOMA terminal before
you subscribe to i-mode, turn off and on the FOMA
terminal.
215
45
i-mode mark continues
blinking and does not
disappear.
≥
i-mode mark continues blinking after you execute
Check New Messages or send/receive mail
messages, or when i-mode is disconnected
midway. The connection is automatically cut off
unless you exchange data files. To immediately end
the connection, press
h
.
—
Still images and moving
pictures shot by the
camera are blurred.
≥
When you shoot a subject in a short distance, set
Focus to “Close-up”.
≥
When you shoot portraits, set Focus to “Face
detection”.
≥
Set Image Stabilizer to “Auto” and then shoot.
≥
Make sure the lens of the camera is not fogged or
stained.
242
242
242
230
Cannot watch 1Seg
programs.
≥
You may be out of the terrestrial digital TV
broadcasting service area or weak airwaves are
being received.
≥
Make sure Channel Setting is completed.
250
251
Cannot delete
Osaifu-Keitai compatible
i-
α
ppli programs.
≥
Some i-
α
ppli programs are not deleted unless you
delete data files on the IC card. Delete the i-
α
ppli
program after deleting data files on the IC card.
When you cannot delete it, contact the docomo
shop, etc. You cannot delete “
iD 設定アプリ (iD
appli)”.
—
Cannot use Osaifu-Keitai
function.
≥
If you remove the battery pack or activate Omakase
Lock, the IC card function becomes unavailable
regardless of the setting of IC Card Lock.
≥
Make sure IC Card Lock is deactivated.
≥
Make sure you place the
f
mark of the FOMA
terminal over the scanning device.
41
127
318
317
Problem Countermeasures Reference