Docomo P-07A Prime Series, Instruction Manual

Page: 20 / 617

18
Eas
y Searc
h
/C
o
n
ten
ts/Preca
utio
ns
■ Make sure that the battery is charged when
you use the FOMA terminal for the first time
or have not used it for a long period of time.
■ The usable time of the battery differs
depending on the usage environment or its
remaining life.
■
Depending on how the battery pack is used, it
might swell as its operating life becomes
short, but this is not a problem.
■
Note the following points when you store a
battery pack over a long period:
≥
Storage in a fully charged state (the state immediately
after charging is completed)
≥
Storage with no battery power left (the state you cannot
turn on the power of the handset due to battery drain)
These may lower the battery pack’s performance and
shorten its operating life.
You are advised to store the battery pack in the state of
two or three bars of battery icon indication as a guide
for when you store it for a long period.
■
Charge the battery in a place with an
appropriate ambient temperature of 5°C to
35°C.
■
Charge the battery where:
≥
There is very little humidity, vibration, and dust.
≥
There are no land-line phones, television sets or
radios nearby.
■ While you are charging, the adapter may
become warm. This is not a malfunction, so
you can keep on using.
■
Do not use the DC adapter for charging the
battery when the car engine is not running.
The car battery could go flat.
■ When using the power outlet having the
disengaging prevention mechanism, observe
the instructions given in that instruction
manual.
Notes on handling adapters
■ Do not give a strong shock. Also, do not
deform the charging terminal.
Malfunction may result.
■
Never use more force than necessary when
inserting/removing the UIM.
■ The UIM may become warm during use, but
this is not a sign of a malfunction. Continue
using it as it is.
■ The warranty does not cover damage caused
by inserting the UIM into some other types of
IC card reader/writer.
■ Always keep the IC portion clean.
■ Use a dry soft cloth such as the one for
cleaning glasses to clean the equipment.
■ It is recommended that you make separate
notes of the information stored on the UIM
and keep such notes in a safe place.
We take no responsibility for any loss of the stored data
items.
■ For the environmental protection, bring any
unneeded UIMs to a handling counter such as
a docomo shop.
■ Avoid using in extremely high or low
temperatures.
■ Do not damage, carelessly touch, or
short-circuit the IC.
Data might be lost or malfunction may result.
■
Do not drop the UIM or subject it to strong
impacts.
Malfunction may result.
Notes on handling the UIM
■ Do not bend the UIM or place something
heavy on it.
Malfunction may result.
■ Into the FOMA terminal, do not insert the UIM
with a label or sticker pasted.
Malfunction may result.
■ As the security for communication using the
Bluetooth function, the FOMA terminal
supports the security function that meets the
Bluetooth Specification. However, the
security may not be sufficient depending on
the configuration. Take care of the security
for communication using the Bluetooth
function.
■ Note that even if any leak of data or
information occurs while making connection
using the Bluetooth function, we take no
responsibility.
■ With the FOMA terminal, you can use the
following: Headset, Hands-Free, Audio,
Dial-up Communication, Object Push, and
Serial Port. With Audio, you might be able to
use Audio Video Remote Control. (Only with
the compatible Bluetooth devices)
Notes on using Bluetooth function