1 of 2
comwave
business
care
| [email protected] | 1-866-500-4107
1
Attach the
Network Cable
included with the
Base Unit
and plug one end into the network port on the
Base Unit. Plug the other end of the cable into the Internet modem, router, switch, hub or RJ-45 network wall jack.
2
Firmly plug the
Power Adapter
(AC Adapter) into the base unit. You can utilize the hook on the base to
secure it firmly and to prevent it from being accidentally dislodged. The power supply should be connected to
an electrical outlet, power bar, surge protector or UPS.
3
Once the base unit is connected it will go through a regular connection process which may take up to 10 minutes.
Once you see the solid
green
status light, the base is ready and you can proceed in powering up the phones.
4
If the status light remains
red
or
amber
after 10 minutes, try plugging the base unit directly into the
modem instead of any secondary devices (router, switch, hub etc.).
5
Please call Comwave Business Support if the status light does not turn solid
green
.
