Precautions
• Do not attach the dome cover if the camera is mounted on the ceiling.
Doing so may result in an injury if the dome cover falls.
• Do not remove the protective sheet until the camera has been installed in position to prevent scratches during installa-
tion.
Before attempting to connect or install this product, please read these instructions carefully and
save this manual for future use.
Mounting procedures
1
Push the tab in the square hole on the camera with a
tapered tool such as tweezers.
With maintaining this state, rotate the dome fix ring
counterclockwise, removing the dome fix ring and
dome cover.
2
Align the hook on the dome cover (smoke type) and
the grappling hole on the camera, installing the dome
cover.
Note:
• Remove the edge of the protective sheet temporarily.
It may prevent the dome fix ring from being installed.
Leave the protective sheet attached until you install
the camera after fixing the dome ring in order to pre-
vent the dome from being damaged or getting dust.
Operating Instructions
Dome Cover
Model No.
WV-CS4SA
Dome fix ring
Dome cover
Square hole
q
Push
Tab
Dome fix
ring
w
Rotate
Camera
e
Remove
r
Remove
Protective sheet
Hook
Grappling hole
Install
Camera
