Chapter 4 Parameters
4-147
Content Address
Function
2102H Frequency command (F)
2103H
Output
frequency
(H)
2104H
Output
current
(AXXX.X)
2105H
Reserved
2106H
Reserved
2107H
Reserved
2108H DC-BUS Voltage (UXXX.X)
2109H Output voltage (EXXX.X)
210AH
Display temperature of IGBT (
°
C)
2116H User defined (Low word)
2117H User defined (High word)
Note: 2116H is number display of Pr.00.04. High byte of 2117H is number of decimal places
of 2116H. Low byte of 2117H is ASCII code of alphabet display of Pr.00.04.
3.6 Exception response:
The AC motor drive is expected to return a normal response after receiving command
messages from the master device. The following depicts the conditions when no normal
response is replied to the master device.
The AC motor drive does not receive the messages due to a communication fault; thus, the
AC motor drive has no response. The master device will eventually process a timeout
condition.
The AC motor drive receives the messages without a communication fault, but cannot
handle them. An exception response will be returned to the master device and a fault
message “CExx” will be displayed on the keypad of AC motor drive. The xx of “CExx” is a
decimal code equal to the exception code that is described below.
In the exception response, the most significant bit of the original command code is set to 1,
and an exception code which explains the condition that caused the exception is returned.
Example of an exception response of command code 06H and exception code 02H:
ASCII mode:
RTU mode:
STX ‘:’
Address 01H
Address Low
Address High
‘0’
Function 86H
‘1’ Exception
code
02H
Function Low
Function High
‘8’
CRC CHK Low
C3H
‘6’
CRC CHK High
A1H
Exception code
‘0’
‘2’
