Chapter 4 Parameters
4-114
19
Power Board CPU READ Failure (cF2.0)
20
CC, OC Hardware protection failure (HPF1)
21
OV Hardware protection failure (HPF2)
22
GFF Hardware protection failure (HPF3)
23
OC Hardware protection failure (HPF4)
24
U-phase fault (cF3.0)
25
V-phase
fault
(cF3.1)
26
W-phase fault (cF3.2)
27
DCBUS fault (cF3.3)
28
IGBT
Overheat
(cF3.4)
29
Reserved
30
Control Board CPU WRITE failure (cF1.1)
31
Contrsol Board CPU READ failure (cF2.1)
32
ACI signal fault (AErr)
33
Reserved
34
Motor PTC overheat protection (PtC1)
35
PG feedback signal fault (PGEr)
36-39
Reserved
40
Communication time-out fault of control board and power board
(CP10)
41
dEb
fault
42
ACL (Abnormal Communication Loop)
66
U phase output phase loss (oPHL1)
67
V phase output phase loss (oPHL2)
68
W phase output phase loss (oPHL3)
In Pr.06.08 to Pr.06.12 the five most recent faults that occurred, are stored. After removing the
cause of the fault, use the reset command to reset the drive.
06.13
Action for detected Output Phase Loss (OPHL)
Factory Setting: 3
Settings
0
Warn and keep operation
1
Warn and ramp to stop
2
Warn and coast to stop
3
No
warning
06.14
Deceleration Time of Output Phase Loss
Unit: second
Settings
0.0 ~120.0 seconds
Factory Setting: 0.5
