Chapter 4 Parameters
4-47
3 c hanc es to enter the corr ect
password.
1st time displays "1" if
password is incorr ec t.
2nd time dis plays "2", if
password is incorr ec t.
3rd ti me displays " c ode"
(bli nk ing)
If the password was entered
incor rectly after three tries ,
the keypad wi ll be locked.
Turn the power OF F /O N to
re- enter the password.
00.08
input password
Displays 0 when
enter ing cor rect
password into
Pr.00.08.
Decode
If the password is corr ec t?
END
00.09
Password Set
Settings
0 to 9999
Factory Setting: 0
Display
0
No password set or successful input in Pr. 00.08
1
Password has been set
To set a password to protect your parameter settings.
If the display shows 0, no password is set or password has been correctly entered in Pr.00.08.
All parameters can then be changed, including Pr.00.09.
The first time you can set a password directly. After successful setting of password the display
will show 1.
Be sure to record the password for later use.
To cancel the parameter lock, set the parameter to 0 after inputting correct password into Pr.
00.08.
The password consists of min. 1 digits and max. 4 digits.
How to make the password valid again after decoding by Pr.00.08:
Method 1: Re-input original password into Pr.00.09 (Or you can enter a new password if you
want to use a changed or new one).
Method 2: After rebooting, password function will be recovered.
To lock parameters, you can set Pr.00.02 to 1 or Pr.04.05~04.08 to 17 to prevent changing of
parameters settings by unqualified personnel. Please note that it is without password set.
