B-30
ADD1
ADD2
B.8.1.3 Mounting Method
Step1 and step2 show how to mount this communication module onto VFD-E. The
dimension on the left hand side is for your reference.
Dimensions
STEP 1
STEP 2
UNIT: mm(inch)
B.8.1.4 Power Supply
No external power is needed. Power is supplied via RS-485 port that is connected to
VFD-E. An 8 pins RJ-45 cable, which is packed together with this communication module,
is used to connect the RS-485 port between VFD-E and this communication module for
power. This communication module will perform the function once it is connected. Refer to
the following paragraph for LED indications.
B.8.1.5 LEDs Display
1. SP: Green LED means in normal condition, Red LED means abnormal condition.
2. MS (Module): Green blinking LED means no I/O data transmission, Green steady LED
means I/O data transmission OK. Red LED blinking or steady LED means module
communication is abnormal.
3. Ns (Network): Green LED means DeviceNet communication is normal, Red LED means
abnormal
Note:
Refer to user manual for detail information--
Chapter 5 Troubleshooting
.
