B-48
Descriptions of Keypad Functions
Key Descriptions
Start Operation Key
1. It is only valid when the source of operation command is from the keypad.
2. It can operate the AC motor drive by the function setting and the RUN LED will
be ON.
3. It can be pressed again and again at stop process.
Stop Command Key. This key has the highest processing priority in any situation.
1. When it receives STOP command, no matter the AC motor drive is in operation
or stop status, the AC motor drive needs to execute “STOP” command.
2. The RESET key can be used to reset the drive after the fault occurs. For those
faults that can’t be reset by the RESET key, see the fault records after pressing
MENU key for details.
Operation Direction Key
1. This key is only control the operation direction NOT for activate the drive.
FWD: forward, REV: reverse.
2. Refer to the LED descriptions for more details.
ENTER Key
Press ENTER and go to the next level. If it is the last level then press ENTER to
execute the command.
ESC Key
ESC key function is to leave current menu and return to the last menu. It is also
functioned as a return key in the sub-menu.
Press menu to return to main menu.
Menu content:
KPC-CC01 does not support function 4, 5, and 7; only support part function of 10,11,
12, and 13.
1. Detail Parameter
2. Copy Parameter
3. Keypad Locked
4. PLC Function
5. Copy PLC
6. Fault Record
7. Quick/Simple
Setup
8. Display
Setup
9. Time
Setup
10. Language Setup
11. Startup Menu
12. Main Page
13. PC Link
Direction: Left/Right/Up/Down
1. In the numeric value setting mode, it is used to move the cursor and change the
numeric value.
2. In the menu/text selection mode, it is used for item selection.
Does not support function
