Dell Force10 MXL Blade, Reference Manual

Page: 95 / 732

Access Control Lists (ACL) | 95
The following commands allow you to clear, display, and assign IP ACL configurations.
• access-class
• clear counters ip access-group
• ip access-group
• show ip access-lists
• show ip accounting access-list
access-class
Apply a standard ACL to a terminal line.
Syntax access-class
access-list-name
Parameters
Defaults
Not configured.
Command Modes LINE
Command
History
clear counters ip access-group
Erase all counters maintained for access lists.
Syntax
clear counters ip access-group
[ access-list-name ]
Parameters
Command Modes
EXEC Privilege
Command
History
ip access-group
Assign an IP access list (IP ACL) to an interface.
Syntax ip access-group
access-list-name {
in
|
out
} [
implicit-permit
] [
vlan
vlan-id ]
Parameters
Note:
See also Commands Common to all ACL Types .
access-list-name Enter the name of a configured Standard ACL, up to 140 characters.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
access-list-name
(OPTIONAL) Enter the name of a configured access-list, up to 140 characters.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
access-list-name Enter the name of a configured access list, up to 140 characters.
in
Enter the keyword
in
to apply the ACL to incoming traffic.
out
Enter the keyword
out
to apply the ACL to outgoing traffic.